|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
File:Plexiglass Shield.JPG
Jump to navigation
Jump to search
Size of this preview: 800 × 600 pixels. Other resolutions: 320 × 240 pixels | 2,048 × 1,536 pixels.
Original file (2,048 × 1,536 pixels, file size: 717 KB, MIME type: image/jpeg)
I choose to install a plexiglass 'shield' on the side of the aluminum angle iron to reduce the risk of a wire / terminal hitting the aluminum and arcing. I am not sure if that is in the official CalCars plans or not. It is held in by non-conductive nylon screws.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:51, 17 December 2006 | | 2,048 × 1,536 (717 KB) | Cewert (talk | contribs) | I choose to install a plexiglass 'shield' on the side of the aluminum angle iron to reduce the risk of a wire / terminal hitting the aluminum and arcing. I am not sure if that is in the official CalCars plans or not. It is held in by non-conductive nylo |
You cannot overwrite this file.
File usage
The following 4 pages use this file:
