|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 21:37, 20 March 2007 | Welded angle iron 2.jpg (file) |  |
647 KB | Cewert | Shows just the welded angle iron for alt. mounting method | 1 |
| 21:39, 20 March 2007 | Alt method support angle irons.jpg (file) |  |
614 KB | Cewert | Alt. mounting method showing all angle irons (does not have angle iron on center support yet. | 1 |
| 21:40, 20 March 2007 | Right side battery box supports alt method.jpg (file) |  |
633 KB | Cewert | Alt. mounting method. Shows right side of supports | 1 |
| 21:41, 20 March 2007 | Left side battery box supports alt method.jpg (file) |  |
622 KB | Cewert | Alt mounting method. Shows left side of battery box supports | 1 |
| 21:42, 20 March 2007 | Rubber on center batt box support.jpg (file) |  |
629 KB | Cewert | Alt mounting method. Shows rubber pads on the battery box support. | 1 |
| 21:44, 20 March 2007 | Entire alt batt box mounting supports.jpg (file) |  |
622 KB | Cewert | Alt. mounting method. Shows supports with trays in place. | 1 |
| 15:23, 21 March 2007 | Electronics Box Partial 1.jpg (file) |  |
679 KB | Cewert | Mostly completed electronics box without top. This is for the alt. mounting method. | 1 |
| 15:25, 21 March 2007 | Electronics Box Partial 2.jpg (file) |  |
717 KB | Cewert | Partially completed electronics box for alt. mounting method. | 1 |
| 14:22, 22 March 2007 | EscapeBlowerSpeed.gif (file) |  |
4 KB | DavideAndrea | Ford Escape Hybrid - Blower speed vs car speed | 1 |
| 22:25, 28 March 2007 | DO-5 Diode.jpg (file) |  |
112 KB | Cewert | The DO-5 Diode as it comes from DigiKey | 1 |
| 22:25, 28 March 2007 | PP75 Connectors.jpg (file) |  |
30 KB | Cewert | PowerPole 75 amp connector housings and 8AWG crimps | 1 |
| 08:08, 31 March 2007 | PiPrius CAN-View PHEV1.png (file) |  |
1,014 KB | Rjf | Suggested PiPrius CAN-View PHEV Page1 layout. | 1 |
| 08:08, 31 March 2007 | PiPrius CAN-View PHEV2.png (file) |  |
1 MB | Rjf | Suggested PiPrius CAN-View PHEV Page2 layout. | 1 |
| 08:09, 31 March 2007 | PiPrius CAN-View Set-PHEV.png (file) |  |
1.03 MB | Rjf | Suggested PiPrius CAN-View PHEV settings. | 1 |
| 08:09, 31 March 2007 | PiPrius CAN-View Set-RL2.png (file) |  |
1.01 MB | Rjf | Suggested PiPrius CAN-View RL2 (Relay 2) settings. | 1 |
| 08:10, 31 March 2007 | PiPrius CAN-View Set-RL3.png (file) |  |
1.01 MB | Rjf | Suggested PiPrius CAN-View RL3 (Relay 3) settings. | 1 |
| 08:10, 31 March 2007 | PiPrius CAN-View Set-RL5.png (file) |  |
1.01 MB | Rjf | Suggested PiPrius CAN-View RL5 (Relay 5) settings. | 1 |
| 08:10, 31 March 2007 | PiPrius CAN-View Set-RL6.png (file) |  |
1.08 MB | Rjf | Suggested PiPrius CAN-View RL6 (Relay 6) settings. | 1 |
| 20:23, 15 April 2007 | EAA-PHEV-PRIUS-ControlBdSchematic.png (file) |  |
137 KB | Cewert | v4.3_070316 | 7 |
| 20:26, 15 April 2007 | EAA-PHEV-PRIUS-ControlBdSchematic.zip (file) |  |
123 KB | Cewert | V4.3_070316 | 6 |
| 03:00, 25 April 2007 | EAA-PHEV-PRIUS-FanCtlSchematic.zip (file) | |
3 KB | Cewert | For Control Board Version V4.2_070217 | 1 |
| 23:13, 26 April 2007 | Electronics Box And Charger in Tire Well.jpg (file) |  |
1.55 MB | Cewert | Alt. mounting method lower level complete. | 1 |
| 23:16, 26 April 2007 | Electronics Box And Charger in Tire Well 2.jpg (file) |  |
1.51 MB | Cewert | Alt. mounting method, electronics box and charger in tire well with top on HV section of electronics box. | 1 |
| 23:17, 26 April 2007 | HVD1 in electronics box.jpg (file) |  |
1.49 MB | Cewert | Alt. mounting method, shows HVD1 wired up in the electronics box | 1 |
| 23:19, 26 April 2007 | Contactors in electronics box.jpg (file) |  |
1.37 MB | Cewert | Shows the contactors, snubbers and disconnect for OEM battery tie-in. | 1 |
| 23:21, 26 April 2007 | Left side of electronics box.jpg (file) |  |
1.18 MB | Cewert | Shows the left outside of the electronics box | 1 |
| 23:29, 26 April 2007 | Electronics box being assembled.jpg (file) |  |
1.2 MB | Cewert | Assembling the electronics box: its taped together awaiting epoxy glue | 1 |
| 23:30, 26 April 2007 | Fuses in electronics box.jpg (file) |  |
1.5 MB | Cewert | Fuses in the electronics box. | 1 |
| 23:35, 26 April 2007 | Zivan NG3 Charger connected.jpg (file) |  |
673 KB | Cewert | Alt. mounting method, shows wiring to ZiVan NG3 charger | 1 |
| 23:42, 26 April 2007 | PriusPlus control board unstuffed front.jpg (file) |  |
714 KB | Cewert | Front of PriusPlus control board - unstuffed | 1 |
| 23:43, 26 April 2007 | PriusPlus control board unstuffed back.jpg (file) |  |
705 KB | Cewert | Back of PriusPlus control board - unstuffed | 1 |
| 23:45, 26 April 2007 | Batteries being installed 1.jpg (file) |  |
707 KB | Cewert | Batteries being installed (alt. mounting method in Chris Ewert's car.) | 1 |
| 23:46, 26 April 2007 | Batteries being installed 2.jpg (file) |  |
688 KB | Cewert | Batteries being installed on Chris Ewert's conversion - alt. mounting method. | 1 |
| 23:48, 26 April 2007 | Batt box top modified for alt mounting method.jpg (file) |  |
700 KB | Cewert | The battery box top after it was modified for use with the alturnative mouting method. | 1 |
| 23:51, 26 April 2007 | Right side of electronics box.jpg (file) |  |
1.26 MB | Cewert | 1 | |
| 23:58, 26 April 2007 | OEM Battery Hold Down Screw.jpg (file) |  |
152 KB | Cewert | Bolts holding down the carpeting on top of the OEM battery | 1 |
| 23:59, 26 April 2007 | Removing carpeting from top of OEM battery.jpg (file) |  |
672 KB | Cewert | Removing the carpeting from the top of the OEM battery | 1 |
| 00:01, 27 April 2007 | Removing rear drivers side seat top.jpg (file) |  |
713 KB | Cewert | Removing the rear drivers side seat to access the OEM battery | 1 |
| 00:04, 27 April 2007 | OEM battery exposed.jpg (file) |  |
693 KB | Cewert | The OEM battery, almost ready to be unscrewed (service plug must be disconnected first.) | 1 |
| 00:07, 27 April 2007 | Opening OEM battery.jpg (file) |  |
692 KB | Cewert | Opening up the OEM battery (make sure to disconnect service plug FIRST!) | 1 |
| 00:09, 27 April 2007 | Inside OEM battery from back of car.jpg (file) |  |
689 KB | Cewert | The inside of the OEM battery from the rear of the car (unmodified.) | 1 |
| 00:10, 27 April 2007 | Inside OEM battery after tie in.jpg (file) |  |
678 KB | Cewert | Inside the OEM battery after the HV tie in is completed. | 1 |
| 00:12, 27 April 2007 | Low voltage wiring inside OEM Battery.jpg (file) |  |
675 KB | Cewert | Unmodified low voltage wiring inside OEM battery. Shows green wires from contactors going to chassis ground. | 1 |
| 00:13, 27 April 2007 | Low voltage wiring inside OEM Battery modified.jpg (file) |  |
671 KB | Cewert | Modified wiring inside the OEM battery. This is for the charge interlock system and the ready wire tap. | 1 |
| 04:31, 28 April 2007 | EAA-PHEV-PRIUS-ControlBd layout.png (file) |  |
45 KB | Cewert | V4.3_20070904 | 1 |
| 10:02, 2 May 2007 | DSC00308.JPG (file) |  |
911 KB | Rjf | PriusBlue at the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 10:11, 2 May 2007 | DSC00315.JPG (file) |  |
696 KB | Rjf | PriusBlue at the nine canyon road wind farm with it's many 60 meter (200 foot) 1330 kW turbines after the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 06:47, 4 May 2007 | DSC00307.JPG (file) |  |
829 KB | Rjf | PriusBlue at the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 06:47, 4 May 2007 | DSC00309.JPG (file) |  |
825 KB | Rjf | PriusBlue at the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 10:19, 9 May 2007 | Maker faire 2006.gif (file) |  |
6 KB | Rjf | Logo from the Inaugural Maker Faire in 2006. | 1 |
