General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Battery Tap Emulator"

From My wiki
Jump to navigation Jump to search
(Category)
m (English corrections)
Line 1: Line 1:
All Hybrid Battery Management Systems use Battery Taps to monitor battery integrity and voltage balance because a [[WikiPedia:Battery pack|W:Battery Pack]] is only as strong as it's weakest cell.  Packs are made up of series strings of cells.  Individule cells are arranged into modules or batteries, such a series arrangement increases the Voltage while the capacity ''(Amp Hours, Ah)'' remains unchanged.  Most battery packs are simple single series strings, but other [[Battery Pack Configurations]] can be used.
+
All Hybrid Battery Management Systems use Battery Taps to monitor battery integrity and voltage balance because a [[WikiPedia:Battery pack|W:Battery Pack]] is only as strong as its weakest cell.  Packs are made up of series strings of cells.  Individual cells are arranged into modules or batteries, such a series arrangement increases the Voltage while the capacity ''(Amp Hours, Ah)'' remains unchanged.  Most battery packs are simple single series strings, but other [[Battery Pack Configurations]] can be used.
  
Since each battery chemestry has different cell voltages it may not be possible to tap a replacement pack in the same manner as the original.  However with a voltage divider or set of resistors the pack voltage can be made to emulate the taps no matter the particular dimensions or number of taps in the original pack.
+
Since each battery chemistry has a different cell voltage, it may not be possible to tap a replacement pack in the same manner as the original.  However with a voltage divider or set of resistors the pack voltage can be made to emulate the taps no matter the particular dimensions or number of taps in the original pack.
  
As the battery taps are also used to measure full pack voltage using a tap emulator also allows for other tricks such as [[State Of Charge Manipulation]].
+
As the battery taps are also used to measure full pack voltage, using a tap emulator also allows for other tricks such as [[State Of Charge Manipulation]].
  
 
==Prius==
 
==Prius==

Revision as of 17:33, 16 June 2006

All Hybrid Battery Management Systems use Battery Taps to monitor battery integrity and voltage balance because a W:Battery Pack is only as strong as its weakest cell. Packs are made up of series strings of cells. Individual cells are arranged into modules or batteries, such a series arrangement increases the Voltage while the capacity (Amp Hours, Ah) remains unchanged. Most battery packs are simple single series strings, but other Battery Pack Configurations can be used.

Since each battery chemistry has a different cell voltage, it may not be possible to tap a replacement pack in the same manner as the original. However with a voltage divider or set of resistors the pack voltage can be made to emulate the taps no matter the particular dimensions or number of taps in the original pack.

As the battery taps are also used to measure full pack voltage, using a tap emulator also allows for other tricks such as State Of Charge Manipulation.

Prius

Battery Tap Emulator 2g.

The 2004-2005 Prius pack consists of 168 cells, 6 per module, and each pair of modules is tapped, for 14 subpacks.

Insight

The Insight pack consists of 120 cells, 6 per module. I believe each pair of modules is tapped, for 10 subpacks.