General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "CAN-View"

From My wiki
Jump to navigation Jump to search
(another V4 mounting thread)
(update of chrisdragon.com document)
Line 20: Line 20:
 
** [http://priuschat.com/index.php?showtopic=26011 Where can I get CAN-view?]
 
** [http://priuschat.com/index.php?showtopic=26011 Where can I get CAN-view?]
 
** [http://priuschat.com/index.php?showtopic=25759 Prius CAN Monitor and data logger for Windows PC]
 
** [http://priuschat.com/index.php?showtopic=25759 Prius CAN Monitor and data logger for Windows PC]
* Installation [http://www.hybridinterfaces.ca/installNONAV.html Without] <ref>[[Media:CAN-View installNONAVwt.pdf]] Adapted from http://www.hybridinterfaces.ca/installNONAV.html</ref> or [http://www.hybridinterfaces.ca/installWNAV.html With] <ref>[[Media:CAN-View installWNAVwt.pdf]] Adapted from http://www.hybridinterfaces.ca/installWNAV.html</ref> Navigation.
+
* Installation [http://www.hybridinterfaces.ca/installNONAV.html Without] <ref>[[Image:CAN-View installNONAVwt.pdf]] Adapted from http://www.hybridinterfaces.ca/installNONAV.html</ref> or [http://www.hybridinterfaces.ca/installWNAV.html With] <ref>[[Image:CAN-View installWNAVwt.pdf]] Adapted from http://www.hybridinterfaces.ca/installWNAV.html</ref> Navigation.
** [https://www.metrotpn.com/documents/PDF%20Files/Prius/Eddie's%20XMRadio%20Install/PriusXMradio3.2.pdf PriusXMradio3.2.pdf] <ref>[[Media:PriusXMradio3.2.pdf]] from https://www.metrotpn.com/documents/PDF%20Files/Prius/Eddie's%20XMRadio%20Install/PriusXMradio3.2.pdf</ref>
+
** [https://www.metrotpn.com/documents/PDF%20Files/Prius/Eddie's%20XMRadio%20Install/PriusXMradio3.2.pdf PriusXMradio3.2.pdf] <ref>[[Image:PriusXMradio3.2.pdf]] from https://www.metrotpn.com/documents/PDF%20Files/Prius/Eddie's%20XMRadio%20Install/PriusXMradio3.2.pdf</ref>
** [http://web.archive.org/web/*/http://www.chrisdragon.com/downloads/Stereo%2520Accessory%2520Install%2520Guide,%252004%2520Prius,%2520v1.03.pdf  Stereo Accessory Install Guide, 04 Prius, v1.03.pdf] <ref>[[Media:Stereo Accessory Install Guide 04 Prius v1.03.pdf]] from
+
** [[Image:Stereo Accessory Install Guide 04 Prius v1.03.pdf]] <ref>[[Image:Stereo Accessory Install Guide 04 Prius v1.03.pdf]] from
 
[http://web.archive.org/web/*/http://www.chrisdragon.com/downloads/Stereo%2520Accessory%2520Install%2520Guide,%252004%2520Prius,%2520v1.03.pdf http://www.chrisdragon.com]</ref>
 
[http://web.archive.org/web/*/http://www.chrisdragon.com/downloads/Stereo%2520Accessory%2520Install%2520Guide,%252004%2520Prius,%2520v1.03.pdf http://www.chrisdragon.com]</ref>
  
Line 30: Line 30:
 
* [http://autos.groups.yahoo.com/group/Prius_Technical_Stuff/message/16793 Recording and analysis of CAN-View data]
 
* [http://autos.groups.yahoo.com/group/Prius_Technical_Stuff/message/16793 Recording and analysis of CAN-View data]
 
** [http://mggm.net/prius/candecoder.html Program to convert raw CAN data into CSV, thanks to Gary Morris]
 
** [http://mggm.net/prius/candecoder.html Program to convert raw CAN data into CSV, thanks to Gary Morris]
* [http://autos.groups.yahoo.com/group/Prius_Technical_Stuff/message/15958 HyperTerm Logging]
+
* [http://autos.groups.yahoo.com/group/Prius_Technical_S
* [http://autos.groups.yahoo.com/group/Prius_Technical_Stuff/message/16044 RealTerm Logging] ''Prefered''
 
** http://realterm.sourceforge.net/
 
*# In short, set the CAN-View Data source to "RAW" and enable serial output to start sending the CAN data.
 
*# Launch realterm and choose the correct COM port, set the display to "hex(space)" ''display=2 in the next example''
 
*# Once that works create a shortcut like C:\folder\realterm.exe" port=5 baud=115200 display=2 capfile=C:\Prius0.txt
 
 
 
==The Mode Button==
 
Since early on there has been a "mode button", ''the one with the green border'', for which if connected to the OEM EV-Mode button pin would enable/disable that mode when pressed.  It also displayed the mode that the car was in, recently a number of new modes have been added to the software, the possible modes are:
 
* <font color=red>'''ICE run'''</font>  - ''the engine is running and consuming fuel''
 
* <font color=aqua>'''Stealth'''</font>  - ''the engine is not running and any motion is being produced by the battery alone.''
 
* <font color=green>'''EV mode'''</font>  - ''you are in EV mode, a higher level stealth mode.''
 
** <font color=red>'''EV try'''</font>  - ''you have pressed the vehicle EV button (or have the relay board option and have pressed this icon directly)''
 
** <font color=red>'''EV deny'''</font> - ''means the Prius has rejected your request for EV mode, based on vehicle speed, SOC, too low or too high a temperature.''
 
* <font color=blue>'''ICE spin'''</font> - ''similar to Stealth but occurs above ~42mph''
 
* <font color=red>'''WOTmode'''</font>  - ''Wide Open Throttle mode''
 
* <font color=orange>'''B-brake'''</font>  - ''ICE Compression Braking mode, like selecting "B" on the shifter''
 
 
 
==Additional accessories==
 
These additional features are supported by the 2nd & 3rd version of the CAN-View, some require additional hardware.
 
* [http://priuschat.com/index.php?showtopic=11644&st=40# Field Programming]
 
** The Silabs development kit C8051F310DK (available on the DigiKey website at US$99)
 
*Aftermarket Navigation System Interface ''([http://www.google.com/search?q=Pioneer+AVIC-88 Pioneer's AVIC-88])''
 
*Serial MFD touch screen coordinates are outputted from the CAN-View via a serial DB9 RS232 port.
 
*SCART Plugs and cables. [http://cpc.farnell.com/jsp/endecaSearch/searchPage2.jsp?Ntt=scart+sockets&Nty=1&N=411&Ntk=gensearch]
 
*A $110 CC2RGB converter from http://www.threedoubleyou.com/otherconverters.htm
 
:outputs composite NTSC video via the CAN-View.
 
:''A VAIS iPod interface might be desirable for audio.''
 
* per [http://priuschat.com/index.php?showtopic=11644&view=findpost&p=206535], This may be another option for  [http://www.tkk.fi/Misc/Electronics/circuits/vga2rgbs.html VGA to RGB + composite sync converter]
 
*A $99 BOBIII device from http://www.decadenet.com outputs clean RGBs to the MFD via the CAN-View, it uses serial input to create color text.
 
 
 
== Related Topics ==
 
* [http://priuschat.com/index.php?showtopic=2281 unrelated hardware level display hijacking]
 
* The '''CAN-View''' should not be confused with this [http://www.rmcan.com/index.php?id=61&L=1 CANview] product (notice no dash in the name), which is a CAN to RS232 device similar to the [http://www.can232.com/ CAN232] used by [http://www.vassfamily.net/ToyotaPrius/CAN/cindex.html Attila Vass] with his early [[Prius PHEV User Interfaces#My CAN Project|My CAN Project]].
 
* See also [[Prius PHEV TechInfo#CAN Tools]]
 
 
 
 
 
==References==
 
<references/>
 
 
 
[[Category:Prius]]
 
[[Category:PHEV]]
 
[[Category:Prius PHEV]]
 
[[Category:PiPrius]]
 
[[Category:PriusPlus]]
 

Revision as of 08:09, 4 October 2007

Contents

One of the graph screens
See the Official Website
Ryan showing Dr. Andrew Frank his CAN-View at the June, 1 2006 EVent.

The CAN-View v1, v2, and v3 are MFD Integrated CAN Scanner for the 2nd Generation (2004-2005) Prius. A new more powerful version 4 is now available which uses an external touch screen<ref>VM7000 7" touchscreen at mini-box.com for use with the v4 CAN-View.</ref> so that it can be used in the 2006+ and other CAN enabled Hybrids. It is hoped that the new version will eventually work in vehicles such as the Camry, Highlander, RX 400h, GS 450h, and Ford Escape Hybrid! The CAN-View is used as the Prius PHEV User Interfaces in both the PriusPlus and PiPrius projects. The Official CAN-View Website is http://www.hybridinterfaces.ca. The CAN-View is not compatible with the Classic (2000-2003) Prius, go here for other potential solutions.

http://www.chrisdragon.com</ref>

DataLogging