General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Hybrids-Plus"

From My wiki
Jump to navigation Jump to search
(→‎Timeline: 1st contract)
(→‎Timeline: updated)
Line 68: Line 68:
 
*July 3 2006 - got our first Prius to convert - cleared the contents down to the stock traction pack
 
*July 3 2006 - got our first Prius to convert - cleared the contents down to the stock traction pack
 
*July 5 2006 - website up
 
*July 5 2006 - website up
*July 7 2006 - first contract: Colorado Office of Energy Management
+
*July 7 2006 - first contract: [http://www.colorado.gov/oemc/ Colorado Office of Energy Management]
 +
*July 11 206 - finished building the first set of electronics: charger, controller, cell BMS modules
  
 
==Links==
 
==Links==
 
*http://Hybrids-Plus.com
 
*http://Hybrids-Plus.com

Revision as of 00:03, 12 July 2006

Hybrids-Plus / EnergySense are presently developing a PHEV conversion system for the Toyota Prius.

Based in Boulder CO, the group is focusing on the Colorado Front Range market.




Vehicle specs

Location of stock battery pack in a Prius. Note location of spare tire.
Location of Hybrids-Plus battery pack in a Prius.Note that you can still reach the spare tire.
  • Pure EV range (< 34 mph): 30 miles
  • PHEV range (conservative driving, after full charge): 50 miles
  • PHEV fuel efficiency (conservative, full charge): 100 mpg
  • Adds 70 kg to vehicle mass
  • Conversion locations:
    • In place of OEM battery, and taking some of the space occupied by the black tray in trunk
    • Maintains access to spare tire, in its original location
    • Charge plug in rear bumper


Technology

Block Diagram of stock battery pack
Block Diagram of PHEV pack.
  • Original traction pack and Battery ECU removed
  • New traction pack:
    • LiIon - A123 26650 cells (same as DeWalt 36V battery packs)
    • 9.2 kWh
  • Electronics:
    • Charger:
      • 1.35 KW, 115 Vac @ 15 A
      • Non-isolated from AC-line (traction pack is isolated from rest of vehicle during charging)
      • Power Factor Controlled Step-up
      • 80% DOD to charged in 9 hours
      • Proprietary custom design
    • BMS
      • One module per set of parallel cells, with charge current pypass shunt
      • A BMS controller, powered by vehicle aux 12 V, isolated from traction pack
      • Proprietary custom design
    • Controller
      • Interfaces to BMS, charger, vehicle
      • CAN interface to the vehicle
      • Powered by vehicle aux 12 V
      • Proprietary custom design



Team

Timeline

  • Spring 2006 - initial explorations
  • June 7 2006 - Hybrids Plus incorporated
  • June 26 2006 - official start of work
  • July 3 2006 - got our first Prius to convert - cleared the contents down to the stock traction pack
  • July 5 2006 - website up
  • July 7 2006 - first contract: Colorado Office of Energy Management
  • July 11 206 - finished building the first set of electronics: charger, controller, cell BMS modules

Links