General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Maker Faire Photos"

From My wiki
Jump to navigation Jump to search
(added thumb for traced HV image.)
({{PiPrius-Menu|mw-collapsed}}{{TOCright}})
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
These are photos from the [[Inaugural Maker Faire]]
+
{{PiPrius-Menu|mw-collapsed}}{{TOCright}}
−
See also:
+
{{Inaugural Maker Faire Post EVent}}
−
* Jerry Pohorsky - [http://photoshow.comcast.net/watch/AA5bv7Ym Photoshow 1], [http://photoshow.comcast.net/watch/jN3dx3rZ Photoshow 2], [http://photoshow.comcast.net/watch/ku2MJ6RI Photoshow 3]
+
 
−
* Amanda Kovattana [http://amandakovattana.blogspot.com/2006/04/make-faire-plug-in-prius-demo.html Make Faire Plug-in Prius Demo]
 
−
* CNet News - [http://news.com.com/1606-2_3-6064470.html video] interview with Felix
 
−
* [[Inaugural Maker Faire#Post_EVent]]
 
  
 
<gallery>
 
<gallery>
Line 63: Line 60:
  
  
 +
[[Category:PHEV]]
 +
[[Category:Prius]]
 +
[[Category:CalCars]]
 
[[Category:PriusBlue]]
 
[[Category:PriusBlue]]
−
[[Category:Prius PHEV]]
+
[[Category:Maker Faire]]
−
[[Category:PHEV]]
 

Latest revision as of 13:13, 14 June 2020

Click show for a short list of the current PHEV conversion and kit options for the Toyota Prius.

For Prius conversion details see the Prius PHEV article and comparisons table.

  1. Ron's Original PriusPlus History and current Contactor Based PriusPlus documentation for DIY projects.
  2. Ryan's PriusBlue is the testbed for DC-DC PFC Based PiPrius kits and documentation for DIY projects.
  3. Toyota OEM Prius PHEV and Prime Could use some work on this page
  4. Enginer China. But the rest of these appear to all be defunct as of 2020?
  5. |~- Hybrids-Plus USA/Colorado/Li -~|~- EnergyCS USA -~|~- Hymotion USA/Canada -~|~- Amberjac UK. -~|~- EDrive USA -~| Peter mentioned Plug-In Conversions |~-

--={ PiPrius }={ Process }={ fan control }={ Manzanita Micro }={ MM-PFC }={ Mk 3 Reg }=--
--={ PriusBlue }={ Maker Faire }={ Photos }={ EVents }={ 2006 mpg }={ 2005 mpg }=--
--={ CAN-View }={ Schematics }={ User Interfaces }={ Battery Options }={ TechInfo }=--

--={ More Vehicles: AVI }={ WhiteBird }={ GrayPearl }={ GreenCarCo }=--

Team Photo from the PriusPlus conversion of Sven's Prius from Nov 2006.
  • Add a new thumbnail for PirusBlue and other cars?

These are photos from the Inaugural Maker Faire of Ryans 2005 Prius named PriusBlue, we also have local Maker Faire Photos.


  • Seats removed, Vents installed.)

  • The removed Toyota HV Battery Service plug)

  • CAN-View (grey) and video signal adapter (black) under passanger seat.

  • Removed pieces, storage compartment, spare tire & jack, the carpet can go back.

  • Seats on the roof, sticker going on the bumper, camera shooting into the trunk.

  • Battery Tap/Interconnect strip, with additional length of ribbon cable spliced in. See State Of Charge Manipulation & Battery Tap Emulator.

  • Delta-Q battery charger.

  • One of Four sub-pack modules made up of 5 12v 20Ah SLA PbA B&B Batteries.

  • The Seats are on the roof

  • More interior parts on the roof

  • Makers Faire Crew doing their thing

  • OEM high power components 1/2 (Battery edge, Battery ECU, Tap Connector, Main Contactors, Precharge Resistor)

  • OEM high power components 2/2 (Battery edge, Battery ECU, Tap Connector, Main Contactors, Precharge Resistor)

  • HV disconnected to Inverter under hood.

  • Three connectors on the drivers rear side of the OEM HV box.

  • Disconnected control ground of one OEM main contactor to control Charge Interlock.

  • Tapped positive(+12v) control of one OEM main contactor for Ready (car on) Interlock.

  • HV rewired
    Added Traces

  • Rewired Complete, HV (-), (+)Bat, (+)Inv, ribbon tap cable, (+)12v Ready Interlock, (-)Charge Interlock.

  • grey OEM NiMH pack, and one of about 20 PbA PHEV batteries and half the rack.

  • grey CAN-View, black Video converter, HV and interiour nuts and bolts

  • Misc low power cables under rear passenger door molding.

  • Misc low power cables over rear passenger wheel well.

  • Drivers side OEM battery pack brace.

  • Passenger side OEM battery pack brace. forgot the forced air plumbing.

  • Passenger side OEM battery pack forced air exaust.

  • Passenger side OEM battery pack forced air intake.

  • Mockup of Electronics Module (Shunt, NiMH Contactor, HV Board, Junction Board, Circulation Fan, Fuses, PbA Center Pack Contactor).

  • Mockup of Electronics Module (Shunt, NiMH Contactor, HV Board, Junction Board, Circulation Fan, Fuses/Control Board, PbA Center Pack Contactor).

  • Three 50W heating pads.

  • Full view of Delta-Q Charger install.

  • Wheel well components GFI, unswitched/switched quad, switched quad, 12v 3A power supply, 110v 500W inverter.

  • Drop cord spool over accessory battery.

  • Battery Rack over heating pads.

  • Ready to wire up the electronics board.

  • Installation complete, Bypass plugs.

  • Installation complete, Delta-Q Charger.

  • Installation complete, Bypass plugs.

  • HV Board wired.

  • Control Board wired.

  • Electronics Module wired.

  • End of Inaugural Maker Faire conversion roadtrip.

Retrieved from "https://www.eaa-phev.org/wiki/index.php?title=Maker_Faire_Photos&oldid=6780"