General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Prius PHEV User Interfaces"

From My wiki
Jump to navigation Jump to search
Line 4: Line 4:
  
 
==CAN-View Scanner==
 
==CAN-View Scanner==
[[Image:Inimech.jpg|thumb|right|One of the graph screens<br>'''See the [http://www.hybridinterfaces.ca Official Website]''']]
+
The [[CAN-View]] is now the first official user interface for the [[PriusPlus]] conversions.
 
 
This is a [[MFD]] Integrated [[CAN]] Scanner, named CAN-View.<br>
 
The Official Website is http://www.hybridinterfaces.ca
 
* Now available at http://www.priuschat.com/shop/
 
** Installation Help : [https://www.metrotpn.com/documents/PDF%20Files/Prius/Eddie's%20XMRadio%20Install/PriusXMradio3.2.pdf] [http://www.chrisdragon.com/downloads/Stereo%20Accessory%20Install%20Guide,%2004%20Prius,%20v1.03.pdf]
 
 
 
* [http://priuschat.com/index.php?showtopic=11644 Development Discussion] at Prius Chat [http://groups.yahoo.com/group/Prius_Miniscanner_MarkIII/message/614 yahoo] ( [http://priuschat.com/CAN-VIEW-monitor-t12077.html Lost Thread], [http://www.google.com/search?q=cache:9yflkBICdmIJ:priuschat.com/index.php%3Fshowtopic%3D12077 C1] [http://www.google.com/search?q=cache:OQWcUZ8AF-kJ:priuschat.com/page-2-t12077-s20.html C2] )
 
* [http://priuschat.com/index.php?showtopic=2281 unrelated hardware level display hijacking]
 
 
 
'''DataLogging'''
 
* [http://autos.groups.yahoo.com/group/Prius_Technical_Stuff/message/15958 HyperTerm Logging]
 
 
 
 
 
'''Additional accessories'''<br>
 
These additional features are supported by the 2nd version of the CAN-View, some require additional hardware.
 
* [http://priuschat.com/index.php?showtopic=11644&st=40# Field Programming]
 
** The Silabs development kit C8051F310DK (available on the DigiKey website at US$99)
 
*Aftermarket Navigation System Interface ''([http://www.google.com/search?q=Pioneer+AVIC-88 Pioneer's AVIC-88])''
 
*Serial MFD touch screen coordinates are outputted from the CAN-View via a serial DB9 RS232 port.
 
*SCART Plugs and cables. [http://cpc.farnell.com/jsp/endecaSearch/searchPage2.jsp?Ntt=scart+sockets&Nty=1&N=411&Ntk=gensearch]
 
*A $110 CC2RGB converter from http://www.threedoubleyou.com/otherconverters.htm
 
:outputs composite NTSC video via the CAN-View.
 
:''A VAIS iPod interface might be desirable for audio.''
 
** per [http://priuschat.com/index.php?showtopic=11644&view=findpost&p=206535], This may be another option for  [http://www.tkk.fi/Misc/Electronics/circuits/vga2rgbs.html VGA to RGB + composite sync converter]
 
*A $99 BOBIII device from http://www.decadenet.com outputs clean RGBs to the MFD via the CAN-View, it uses serial input to create color text.
 
  
 
==My CAN Project==
 
==My CAN Project==

Revision as of 09:20, 23 March 2006

This page addresses user interface and State Of Charge Manipulation management device options for Prius PHEV conversions. Such a device would need to be capable of executing logic similar to this Prius PHEV Pseudo Code. Though an actuall Interface or display may not be required so long as the SOC manipulation is handled properly, such an interface is still desireable because it provides the user with feedback and might also allow for user interaction and configuration. Conversly a management device may not be required to perform SOC Manipulation functions with certain conversion methods though the data they provide about the vehicles opperation may still be valuable.

CAN-View Scanner

The CAN-View is now the first official user interface for the PriusPlus conversions.

My CAN Project

Vass Software on the left

OK, not "My" Can Project, but some very nice software none the less.

May Required Linux and all that that entails
Open Source courtesy of Attila Vass!

Other CAN scanners