General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Talk:PriusPlus-Electrical"

From My wiki
Jump to navigation Jump to search
(Correction to be made)
 
(updating todo)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
I believe from the schematic that the fuses should be listed as 2x 60 amp 300 volt fuses (instead of 300 amp), but I don't want to change it without first verifying that.
+
==Todo==
 +
 
 +
* Write up 120v Heater, Charger, power supply, relays & outlets (and hardwiring option)
 +
* Explain molex crimping tool?
 +
 
 +
 
 +
* HV wiring
 +
** Write up snubber creation
 +
** How to crimp PP75's
 +
** Write up battery prep, installation & wiring
 +
*** Needs a diagram of how to lay out batteries (Chris to provide basic sketch, someone else to do diagram)
 +
 
 +
 
 +
* Write up Battery charger wiring (only needed for normal mounting method)
 +
** Optional charger isolation relay wiring.
 +
* 120v inlet / reel wiring
 +
 
 +
* Write up final assembly of the electronics tray and electrical wiring within (needs a diagram)
 +
* Write up final assembly of the electronics box and electrical wiring within (needs a diagram) - for alt. mounting method
 +
 
 +
* General organization
 +
** Make the DigiKey parts lists more visable
 +
** Sync up the DigiKey parts list with the latest lists that Jim provided (Chris)
 +
** Sync up the latest HV parts list
 +
** Clean up parts lists, fix photos, etc

Latest revision as of 15:14, 28 May 2007

Todo

  • Write up 120v Heater, Charger, power supply, relays & outlets (and hardwiring option)
  • Explain molex crimping tool?


  • HV wiring
    • Write up snubber creation
    • How to crimp PP75's
    • Write up battery prep, installation & wiring
      • Needs a diagram of how to lay out batteries (Chris to provide basic sketch, someone else to do diagram)


  • Write up Battery charger wiring (only needed for normal mounting method)
    • Optional charger isolation relay wiring.
  • 120v inlet / reel wiring
  • Write up final assembly of the electronics tray and electrical wiring within (needs a diagram)
  • Write up final assembly of the electronics box and electrical wiring within (needs a diagram) - for alt. mounting method
  • General organization
    • Make the DigiKey parts lists more visable
    • Sync up the DigiKey parts list with the latest lists that Jim provided (Chris)
    • Sync up the latest HV parts list
    • Clean up parts lists, fix photos, etc