|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
File:Holes drilled in aluminum.JPG
Jump to navigation
Jump to search
Size of this preview: 800 × 600 pixels. Other resolutions: 320 × 240 pixels | 2,048 × 1,536 pixels.
Original file (2,048 × 1,536 pixels, file size: 665 KB, MIME type: image/jpeg)
Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 05:12, 15 December 2006 | | 2,048 × 1,536 (665 KB) | Cewert (talk | contribs) | Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit. |
You cannot overwrite this file.
File usage
The following 4 pages use this file:
