General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "PriusPlus History-Schematics"

From My wiki
Jump to navigation Jump to search
(→‎1/26/2006 Schematics: schematic descriptions.)
Line 10: Line 10:
 
==1/26/2006 Schematics==
 
==1/26/2006 Schematics==
 
* [[PriusPlus]] ([[Media:EAA-PHEV-PRIUS-.doc|.doc]])
 
* [[PriusPlus]] ([[Media:EAA-PHEV-PRIUS-.doc|.doc]])
** - [[:Image:EAA-PHEV-PRIUS-ControlSchematicV1 060118.png|SOC & Control Schematic]] - - [[:Image:EAA-PHEV-PRIUS-BatteryTapEmulatorSchematicV1a 060118.png|Battery Tap Emulator Schematic]] - - [[:Image:EAA-PHEV-PRIUS-HighPowerSchematicV1a 060116.png|High Power Schematic]] -
+
 
 +
* '''[[:Image:EAA-PHEV-PRIUS-ControlSchematicV1 060118.png|SOC & Control Schematic]]'''
 +
** The control schematics contains various runlevel interlocks and manages the other parts of the conversion.
 +
*  '''[[:Image:EAA-PHEV-PRIUS-BatteryTapEmulatorSchematicV1a 060118.png|Battery Tap Emulator Schematic]]'''
 +
** The [[Battery Tap Emulator]] board also contains the [[State Of Charge Manipulation]] circuit and a set of relays which allows for the stock battery pack and it's native taps to be used if nessecary.
 +
*  '''[[:Image:EAA-PHEV-PRIUS-HighPowerSchematicV1a 060116.png|High Power Schematic]]'''
 +
** The High Voltage Schematic deals with all the high voltage connections, relays, fuses, and the battery pack.
  
 
{{EAA-PHEV-Prius-Schematics}}
 
{{EAA-PHEV-Prius-Schematics}}
 
'''Note:''' It might be good to have various ''types'' of schematic sets.  For example a higher level version might include an automatic switch over from the stock to the added battery pack, adding a DPDT contactor on the HV mains and a complex battery tap coupler relay board.  An example of a lower level version might exclude the various interlocks, center pack relay, and simple isolation relays instead of opto-isolators.  Though neither might prove particularly practical they would help by offering various potential design layouts which might be more adaptable to platforms other than the 2004-2005 Prius.
 
  
 
[[Category:Prius PHEV]]
 
[[Category:Prius PHEV]]

Revision as of 07:36, 20 March 2006

This is where you will find schematics and PCB layout files for PriusPlus conversions.

Heads-up from Ron Gremban, 3/10/06:

In the next few days, I will be making a large set of revisions to these schematics, to:

  • Add the ability to switch back to the OEM battery pack at will (important for PbA battery packs, which are unreliable at low temperatures, and during the testing process)
  • Improve compatability with CAN-View, which will now be the first and recommended BMS spoofing and EV-mode automation system (I am actively working with Norm, CAN-View's creator, to ensure effective automation algorithms)
  • Move all high voltage circuitry off the low power control board

As part of a Prius conversion to be done over the course of the Inaugural Maker Faire, April 22-23, we will be dramatically improving the documentation of the basic PbA PRIUS+ conversion process. We will also be publishing complete parts and supplier lists and designing prited circuit boards for the electronics, which we will find some way to get produced for sale afterwards. If you live close enough to get there, please join us to observe a real conversion in process.

1/26/2006 Schematics


Click show for a short list of the current PHEV conversion and kit options for the Toyota Prius.

For Prius conversion details see the Prius PHEV article and comparisons table.

  1. Ron's Original PriusPlus History and current Contactor Based PriusPlus documentation for DIY projects.
  2. Ryan's PriusBlue is the testbed for DC-DC PFC Based PiPrius kits and documentation for DIY projects.
  3. Toyota OEM Prius PHEV and Prime Could use some work on this page
  4. Enginer China. But the rest of these appear to all be defunct as of 2020?
  5. |~- Hybrids-Plus USA/Colorado/Li -~|~- EnergyCS USA -~|~- Hymotion USA/Canada -~|~- Amberjac UK. -~|~- EDrive USA -~| Peter mentioned Plug-In Conversions |~-

--={ Project Overview }={ 2007 Maker Faire }={ Theory }={ Instructions }={ Parts List }={ RawData }={ Latest News }=--
--={ Doc Process }={ Mechanical }={ Electrical }={ Electronic }={ Interest }={ Talk:PriusPlus Main Discussion }=--

--={ Historic }={ Battery }={ Schematics }={ PseudoCode }={ Photos }=--

Team Photo from the PriusPlus conversion of Sven's Prius from Nov 2006.

This is the home of the PRIUS+ PHEV DIY (Do-it-Yourself) documentation. These pages are currently anonymously editable, which may change in the future. Please feel free to use the Discussion page for general discussion and commentary on the main article. If you would like to add to an existing section use the "edit" link near that topic's heading. Don't forget to use the Summary field to describe your changes. While editing use the "Show Preview" button to make sure your changes look like you expect them to, before you click "Save Page".

  This item is out of date but kept for posterity sake,  
  please refer to the current PriusPlus project page.  

EAA-PHEV-PRIUS-Combined.png

The Combined "Map" image below may be out of date and is best for a general overview.
See the PriusPlus History (.doc) and main Prius PHEV page.
Click any of the three schematics to jump to its current version.

Navigation Image

SOC & Control Schematic 2f.
(full size, right click here).
Battery Tap Emulator 2g.
(full size, right click here).
High Power Schematic 2d.
(full size, right click here).