General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Prius PHEV User Interfaces"

From My wiki
Jump to navigation Jump to search
(→‎Other CAN scanners: Prius_Miniscanner_MarkIII now closed)
Line 16: Line 16:
==Other CAN scanners==
==Other CAN scanners==
* []- Classic Prius (2000-2003)
* []- Classic Prius (2000-2003)
* - THS Prius (2004+)
* - THS Prius (2004+) Group now closed, waiting to be deleted
* - Another CAN scanner, with HEV screenshots.
* - Another CAN scanner, with HEV screenshots.
* [] - Translated from Japanese to English
* [] - Translated from Japanese to English

Revision as of 21:44, 4 July 2006

This page addresses user interface and State Of Charge Manipulation management device options for Prius PHEV conversions. Such a device would need to be capable of executing logic similar to this Prius PHEV Pseudo Code. Though an actuall Interface or display may not be required so long as the SOC manipulation is handled properly, such an interface is still desireable because it provides the user with feedback and might also allow for user interaction and configuration. Conversly a management device may not be required to perform SOC Manipulation functions with certain conversion methods though the data they provide about the vehicles opperation may still be valuable.

CAN-View Scanner

The CAN-View is now the first official user interface for 2004 & 2005 Prius PHEV conversions.

My CAN Project

Vass Software on the left

OK, not "My" Can Project, but some very nice software none the less.

May Required Linux and all that that entails
Open Source courtesy of Attila Vass!
Utilizing a CAN232 (CAN to RS232 device)

Other CAN scanners