|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
Difference between revisions of "Prius PHEV User Interfaces"
DavideAndrea (talk | contribs) (Added the "other" CANview) |
(CAN232) |
||
| Line 4: | Line 4: | ||
==CAN-View Scanner== | ==CAN-View Scanner== | ||
| − | The [[CAN-View]] is now the first official user interface for | + | The [[CAN-View]] is now the first official user interface for 2004 & 2005 Prius PHEV conversions. |
==My CAN Project== | ==My CAN Project== | ||
| Line 12: | Line 12: | ||
: May Required Linux ''and all that that entails'' | : May Required Linux ''and all that that entails'' | ||
: '''Open Source''' courtesy of Attila Vass! | : '''Open Source''' courtesy of Attila Vass! | ||
| + | : Utilizing a [http://www.can232.com/ CAN232] (CAN to RS232 device) | ||
==Other CAN scanners== | ==Other CAN scanners== | ||
| Line 20: | Line 21: | ||
*http://www.ecrostech.com/prius/original/PriusFrames.htm | *http://www.ecrostech.com/prius/original/PriusFrames.htm | ||
*http://www.carplugs.com - Source for OBD2 connectors. | *http://www.carplugs.com - Source for OBD2 connectors. | ||
| − | *[http://www.rmcan.com/index.php?id=61&L=1 | + | *[http://www.rmcan.com/index.php?id=61&L=1 CANview] is a CAN to RS232 device, not to be confused with the [[CAN-View]] (notice no dash in the name) |
[[Category:Prius PHEV]] | [[Category:Prius PHEV]] | ||
Revision as of 05:02, 16 June 2006
This page addresses user interface and State Of Charge Manipulation management device options for Prius PHEV conversions. Such a device would need to be capable of executing logic similar to this Prius PHEV Pseudo Code. Though an actuall Interface or display may not be required so long as the SOC manipulation is handled properly, such an interface is still desireable because it provides the user with feedback and might also allow for user interaction and configuration. Conversly a management device may not be required to perform SOC Manipulation functions with certain conversion methods though the data they provide about the vehicles opperation may still be valuable.
CAN-View Scanner
The CAN-View is now the first official user interface for 2004 & 2005 Prius PHEV conversions.
My CAN Project
OK, not "My" Can Project, but some very nice software none the less.
- May Required Linux and all that that entails
- Open Source courtesy of Attila Vass!
- Utilizing a CAN232 (CAN to RS232 device)
Other CAN scanners
- http://www.ecrostech.com/Products/MiniScanner/Intro.htm [1]- Classic Prius (2000-2003)
- http://groups.yahoo.com/group/Prius_Miniscanner_MarkIII - THS Prius (2004+)
- http://www.hemdata.com/Products/Dawn - Another CAN scanner, with HEV screenshots.
- priusdiy.fc2web.com/index - Translated from Japanese to English
- http://www.ecrostech.com/prius/original/PriusFrames.htm
- http://www.carplugs.com - Source for OBD2 connectors.
- CANview is a CAN to RS232 device, not to be confused with the CAN-View (notice no dash in the name)
