General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
User contributions
Jump to navigation
Jump to search
- 15:48, 5 August 2008 diff hist +268 Prius PHEV TechInfo →OBD-II Diagnostic Trouble Codes (DTCs): Added P0AA6 HV Isolation fault DTC to a list of DTCs that are likely to occur during a PHEV conversion - Cewert
- 14:10, 29 March 2008 diff hist +131 PriusPlus-Instructions →LED Board: not needed for CAN control board
- 14:07, 29 March 2008 diff hist +904 PriusPlus-Instructions →Control Board: Removed old control board which was causing too much confusion, replaced with descriptions of new boards
- 14:17, 19 January 2008 diff hist +680 Prius EV Mode Button →How the EV modes work: updated with new observations
- 21:02, 2 January 2008 diff hist +360 Prius PHEV TechInfo →CAN bus: the stock ECU has a split-terminator and common mode choke
- 13:01, 4 October 2007 diff hist 0 N File:Control Specs.zip current
- 19:58, 28 September 2007 diff hist +237 PriusPlus-RawData hinged battery box designs from 2007 Maker Faire conversion
- 19:53, 28 September 2007 diff hist +10 N File:076610.2042-pp2.pdf hinged box
- 19:53, 28 September 2007 diff hist +10 N File:076610.2041-PP2.pdf hinged box
- 19:53, 28 September 2007 diff hist +10 N File:076610.2040-PP2.pdf hinged box
- 19:52, 28 September 2007 diff hist +10 N File:076610.2039-pp2.pdf hinged box
- 19:52, 28 September 2007 diff hist +18 N File:076610.1004-PP2-1.PDF hinged box designs
- 14:05, 23 September 2007 diff hist +2,379 PriusPlus-Theory →Theory Overview: ways to get prius to use electricity
- 03:37, 19 September 2007 diff hist +10 PriusPlus →About the PriusPlus Project: open source
- 03:36, 19 September 2007 diff hist -4 Template:PriusPlus-Doc Process DIY documentation changed to open source project + cleanup
- 17:55, 14 September 2007 diff hist +1 PriusPlus-PartsList Removed inaccurate parts list, uploaded most up to date .xls file
- 17:50, 14 September 2007 diff hist +48 N File:EAA-PHEV-PRIUS-HVPartsList.zip Electrical, Interconnects and High Voltage parts current
- 04:03, 4 September 2007 diff hist +849 Prius PHEV TechInfo SOC spoofing
- 03:52, 4 September 2007 diff hist +336 PriusPlus About section
- 14:52, 14 July 2007 diff hist +63 Talk:PriusPlus-Instructions →Medium Priority: Todos current
- 14:51, 14 July 2007 diff hist -570 PriusPlus-RawData made first attempt at adding reasonable sized thumbnails of schematics (needs more work yet)
- 14:45, 14 July 2007 diff hist +236 PriusPlus-PartsList added link to template for easier editing
- 14:37, 14 July 2007 diff hist -155 PriusPlus-RawData →Older PriusPlus Images: rm'd (no photos there, not really relevant)
- 14:34, 14 July 2007 diff hist -570 PriusPlus-RawData →General Help: rm'd
- 14:33, 14 July 2007 diff hist -937 PriusPlus-RawData cleanup of initial paragraph
- 14:31, 14 July 2007 diff hist +1 m PriusPlus-PartsList →LED Board Parts List
- 14:30, 14 July 2007 diff hist -153 PriusPlus-RawData →A Major Topic: rm'd
- 14:28, 14 July 2007 diff hist -41 PriusPlus-RawData →ToDo: rm'd
- 14:27, 14 July 2007 diff hist -2,445 PriusPlus-RawData →Alternative Mounting Method: rm'd (out of date, info on step-by-step)
- 14:26, 14 July 2007 diff hist -332 PriusPlus-RawData →Raw Large: rm'd
- 14:20, 14 July 2007 diff hist +24 PriusPlus-Instructions →Install Battery Box Foundation (Alternative Method): added diagram
- 14:17, 14 July 2007 diff hist -75 PriusPlus-Instructions →Control Board: cleanup
- 14:16, 14 July 2007 diff hist -208 PriusPlus-Instructions →LED Board: moved parts list to PartsList page
- 14:15, 14 July 2007 diff hist +379 PriusPlus-PartsList LED Board Parts list imported
- 14:12, 14 July 2007 diff hist +335 PriusPlus-PartsList import control board parts list
- 14:12, 14 July 2007 diff hist -387 PriusPlus-Instructions →Control Board: cleanup, moved parts list to PartsList page
- 04:44, 14 July 2007 diff hist +989 User talk:Cewert →Final Push into Single Instruction page.
- 03:32, 14 July 2007 diff hist +1,215 Talk:PriusPlus-Theory old can-view settings current
- 03:32, 14 July 2007 diff hist -1,136 PriusPlus-Theory →The CAN-View: removed invalid/old CAN-View settings (moved to discussion page)
- 03:30, 14 July 2007 diff hist -89 PriusPlus-Theory more cleanup
- 03:29, 14 July 2007 diff hist -949 PriusPlus-Theory cleanup
- 03:27, 14 July 2007 diff hist -150 PriusPlus-RawData unlinked old pages
- 03:25, 14 July 2007 diff hist +1,700 User talk:Cewert Re: Final Push
- 02:54, 14 July 2007 diff hist +2,341 PriusPlus-Theory →The PHEV Battery Pack: wrote a very basic overview of how the system works
- 02:30, 14 July 2007 diff hist +2 m Talk:PriusPlus-Instructions main section
- 02:30, 14 July 2007 diff hist 0 Talk:PriusPlus-Instructions Priorities
- 02:29, 14 July 2007 diff hist +2,327 Talk:PriusPlus-Instructions Master Documentation To-Do list
- 01:56, 14 July 2007 diff hist +44 m PriusPlus-Instructions →OEM Battery Fan Control Tap: todo
- 01:52, 14 July 2007 diff hist +204 PriusPlus-PartsList →Parts list: notice about page not being complete yet
- 01:50, 14 July 2007 diff hist -106 Template:PriusPlus-Doc Process unlink old pages, link Instructions, PartsList (ryan, please don't actually delete old pages yet!)
- 01:45, 14 July 2007 diff hist +150 PriusPlus-RawData Link to Mechanical, Electrical, Electronic pages (now outdated)
- 01:42, 14 July 2007 diff hist +27 PriusPlus-PartsList added doc process header
- 01:41, 14 July 2007 diff hist +11 PriusPlus-PartsList →Parts Needed: HV parts
- 01:41, 14 July 2007 diff hist +1,600 PriusPlus-PartsList Copied incomplete HV parts lists here for now
- 01:38, 14 July 2007 diff hist +2,691 PriusPlus-Instructions Inlet options, First test, CAN-View settings
- 01:27, 14 July 2007 diff hist +150 Talk:PriusPlus-Theory need can-view photos here
- 01:21, 14 July 2007 diff hist +1,411 PriusPlus-Instructions Wire PHEV batteries
- 01:09, 14 July 2007 diff hist 0 PriusPlus-Instructions →Electronics Tray (Classic Method): moved diagram
- 01:08, 14 July 2007 diff hist +1 PriusPlus-Instructions →Electronics Box (Alternative): moved diagram
- 01:07, 14 July 2007 diff hist +620 PriusPlus-Instructions 12v battery tie in, reassemble trunk
- 01:03, 14 July 2007 diff hist +75 Talk:PriusPlus-Instructions page break eventually?
- 01:02, 14 July 2007 diff hist +7,649 PriusPlus-Instructions import safety notice, OEM battery tap
- 00:54, 14 July 2007 diff hist +1,664 PriusPlus-Instructions imported electronics/electrical sub component construction
- 00:52, 14 July 2007 diff hist +3,771 PriusPlus-Instructions moved in OEM batt fan tap
- 00:47, 14 July 2007 diff hist +1,816 PriusPlus-Instructions battery box supports
- 00:29, 14 July 2007 diff hist +5,350 PriusPlus-Instructions dis-assembly of prius, installation of some parts
- 23:39, 13 July 2007 diff hist +275 PriusPlus-Instructions added todos
- 23:33, 13 July 2007 diff hist +2,020 PriusPlus-Instructions import control board / LED board stuff
- 23:28, 13 July 2007 diff hist +2,415 PriusPlus-Instructions imported electronics tray/box
- 16:48, 12 July 2007 diff hist +34 Prius PHEV →Add A Vehicle: copy to Calcars
- 18:22, 30 June 2007 diff hist +17 PriusPlus-Mechanical →Air Vents: classic method only
- 04:08, 29 June 2007 diff hist +4 Talk:PriusPlus-Instructions battery fan tie in
- 23:58, 23 June 2007 diff hist +26 PriusPlus-Electrical →Parts Needed: fans
- 23:56, 23 June 2007 diff hist +87 N PriusPlus-PartsList started page
- 22:50, 23 June 2007 diff hist +38 Talk:PriusPlus-Instructions added inlet to decision time
- 16:19, 23 June 2007 diff hist +616 Talk:PriusPlus-Instructions started outline
- 15:58, 23 June 2007 diff hist +156 PriusPlus-Mechanical →Electronics Box (Alternative): added photos
- 15:49, 23 June 2007 diff hist +111 PriusPlus-Instructions →Classic Mounting Method: new photo
- 15:41, 23 June 2007 diff hist +110 N File:Sven car finished trunk view.JPG Finished (minus plexiglass) view of classic mounting method - slightly outdated now, but pretty much accurate. current
- 15:25, 23 June 2007 diff hist +834 PriusPlus reverted changes by anonymous user (and spell checked)
- 01:23, 23 June 2007 diff hist +41 N File:Electronics Box Assembly - Side Vents.jpg Shows the assembly of the electronics box current
- 01:20, 23 June 2007 diff hist +37 N File:Electronics Box Assembly Mounting Components.jpg The electronics box being constructed current
- 16:23, 16 June 2007 diff hist +4 m PriusPlus-Mechanical →Electronics Tray (Classical): name change
- 16:06, 16 June 2007 diff hist +268 Talk:PriusPlus-Mechanical updated todo current
- 15:45, 16 June 2007 diff hist -1 m PriusPlus-Mechanical →Electronics Box (Alternative)
- 15:42, 16 June 2007 diff hist +804 PriusPlus-Mechanical →Electronics Box (Alternative): Started section
- 15:36, 16 June 2007 diff hist +43 N File:Electronics Box Alternative.png First version of the electronics box layout current
- 19:29, 14 June 2007 diff hist +162 PriusPlus-Electronic →Control Board: problems found with current schematics, updates to follow soon
- 02:22, 10 June 2007 diff hist +5,873 PriusPlus-Instructions added battery box top instructions
- 02:20, 10 June 2007 diff hist +201 PriusPlus-Mechanical →Battery Box Top: alt. mouting method instructions added
- 02:10, 10 June 2007 diff hist +6,648 PriusPlus-Instructions Added the battery box support instructions
- 01:54, 10 June 2007 diff hist +16 PriusPlus-RawData →Rons Images: marked some images as oudated
- 01:50, 10 June 2007 diff hist +83 PriusPlus-Mechanical →Electronics Tray: added diagram
- 01:48, 10 June 2007 diff hist +56 N File:Electronics Tray Classic.png Diagram of the electronics tray (Classic mouting method) current
- 21:44, 9 June 2007 diff hist +3,717 PriusPlus-Mechanical →Battery Box Supports: Added alt. mounting method instructions + diagram
- 21:18, 9 June 2007 diff hist +31 N File:Alt Mounting Diagram.png Diagram of alt. mounting method current
- 21:16, 9 June 2007 diff hist +37 N Talk:PriusPlus-Instructions todos
- 19:01, 9 June 2007 diff hist -6 PriusPlus-Instructions spelling
- 18:57, 9 June 2007 diff hist +4 PriusPlus-Instructions →Alternative Mounting Method: photos & spelling
- 18:53, 9 June 2007 diff hist +63 N File:Finished Alt Mounting Method.jpg Shows the Alt. mounting method trim finished with bumper inlet. current
- 16:39, 9 June 2007 diff hist +9,072 N PriusPlus-Instructions Starting to compile the instructions
- 14:28, 9 June 2007 diff hist +471 PriusPlus-Electronic →CAN-View & EV Mode button: backporting changes
- 14:08, 9 June 2007 diff hist -51 PriusPlus-Theory →EV Mode Button/Wire: Linked to the wrong page
- 14:05, 9 June 2007 diff hist +720 PriusPlus-Theory →EV Mode Button
- 13:30, 9 June 2007 diff hist +4 PriusPlus-RawData →Rons Images: photo of batt fan modification, not contactor modification
- 03:54, 9 June 2007 diff hist +735 PriusPlus-Mechanical →Installation of parts into Prius: basic bumper inlet instructions
- 16:37, 4 June 2007 diff hist -37 PriusPlus-Electrical Charge interlock not going to be needed anymore
- 03:21, 4 June 2007 diff hist +51 Talk:PriusPlus-Mechanical todos
- 15:18, 28 May 2007 diff hist +85 PriusPlus-Mechanical →Side panel Removal: forgot about the arm rest like strips on the side
- 15:14, 28 May 2007 diff hist -80 Talk:PriusPlus-Electrical updating todo current
- 23:51, 27 May 2007 diff hist -29 PriusPlus-Electrical making sections more defined
- 23:47, 27 May 2007 diff hist +340 PriusPlus-Electrical →Tapping into OEM Battery: small additions
- 23:44, 27 May 2007 diff hist -44 Talk:PriusPlus-Electrical →Todo
- 23:42, 27 May 2007 diff hist +7 m PriusPlus-Electrical →Warning & Tips: renamed
- 23:41, 27 May 2007 diff hist +4,542 PriusPlus-Electrical →Tapping into OEM Battery: started writeup
- 23:02, 27 May 2007 diff hist +336 PriusPlus-Mechanical →Battery Box Foundation: started writeup, need to get details
- 22:55, 27 May 2007 diff hist +85 PriusPlus-Mechanical →Assembly Steps: rust proofing
- 22:53, 27 May 2007 diff hist +1,195 PriusPlus-Mechanical →Assembly Steps: photos and a quick start on proceedure
- 22:37, 27 May 2007 diff hist +96 PriusPlus-Mechanical →Parts Needed
- 22:35, 27 May 2007 diff hist -1 m PriusPlus-Mechanical →Side panel Removal
- 22:35, 27 May 2007 diff hist -122 Talk:PriusPlus-Mechanical more todos
- 17:41, 25 May 2007 diff hist +86 PriusPlus-Mechanical →Assembly Steps: tape on terminals of batteries
- 16:55, 25 May 2007 diff hist +81 PriusPlus-Mechanical Electronics Tray Section + photo
- 16:46, 25 May 2007 diff hist -52 PriusPlus-Mechanical Making things more definied
- 16:41, 25 May 2007 diff hist +68 PriusPlus-Mechanical →Tips: jig saw works
- 02:26, 25 May 2007 diff hist +45 PriusPlus-Electrical →Parts Needed: part number for batteries
- 02:21, 25 May 2007 diff hist -95 PriusPlus-Electrical →Cord Reel: belongs somewhere else
- 02:21, 25 May 2007 diff hist +39 PriusPlus-Electrical →Tapping into OEM Battery: started section
- 02:18, 25 May 2007 diff hist -150 PriusPlus-Electrical →Electronics Tray: Snubbers, other small changes
- 01:55, 25 May 2007 diff hist +325 PriusPlus-Electronic →OEM Fan Control Modification: added photos
- 01:43, 25 May 2007 diff hist +61 N File:OEM Battery Fan Wiring - Stripped Back.jpg The OEM battery fan wiring stripped back to expose the wires. current
- 01:42, 25 May 2007 diff hist +55 N File:OEM Battery Fan Wiring.jpg Shows the origional, unmodified OEM battery fan wiring. current
- 01:37, 25 May 2007 diff hist +50 N File:OEM Battery Fan Modification - New Wiring.jpg Shows the new wiring added to the OEM battery fan. current
- 01:35, 25 May 2007 diff hist +87 N File:OEM Battery Fan Modification - Diode Mounting 2.jpg A ladder approach to mounting the diodes for the OEM battery fan override modification. current
- 01:33, 25 May 2007 diff hist +73 N File:OEM Battery Fan Modification - Diode Mounting 1.jpg One way to mount the diodes for the OEM battery fan override modification current
- 01:26, 25 May 2007 diff hist +409 PriusPlus-Electrical →Diode Mounting Photos: added photos
- 01:19, 25 May 2007 diff hist +48 N File:Diode Mounted on Heatsink - Front.jpg Front side of the Diode mounted on the heatsink. current
- 01:18, 25 May 2007 diff hist +48 N File:Diode Mounted on Heatsink - Rear.jpg The back of the heatsink with the diode mounted. current
- 01:17, 25 May 2007 diff hist +73 N File:Nylon Spacer.jpg Nylon spacer for heatsink shown next to the nylon spacer it was made from current
- 01:15, 25 May 2007 diff hist +35 N File:Heatsink with Hole and Spacer.jpg Heatsink including the nylon spacer current
- 01:13, 25 May 2007 diff hist +37 N File:Heatsink with Hole.jpg Heatsink with hole drilled in center. current
- 22:24, 22 May 2007 diff hist +384 Talk:PriusPlus-Electrical →Todo: some updates
- 18:23, 22 May 2007 diff hist -124 Main Page bringing up to date (book and DVD released, holiday season past)
- 16:36, 22 May 2007 diff hist +25 N File:Maker Faire 2007 6.jpg From the 2007 Maker Faire current
- 16:34, 22 May 2007 diff hist +25 N File:Maker Faire 2007 5.jpg From the 2007 Maker Faire current
- 16:33, 22 May 2007 diff hist +25 N File:Maker Faire 2007 4.jpg From the 2007 Maker Faire current
- 16:32, 22 May 2007 diff hist +25 N File:Maker Faire 2007 3.jpg From the 2007 Maker Faire current
- 16:30, 22 May 2007 diff hist +25 N File:Maker Faire 2007 2.jpg From the 2007 Maker Faire current
- 16:29, 22 May 2007 diff hist +25 N File:Maker Faire 2007 1.jpg From the 2007 Maker Faire current
- 02:43, 22 May 2007 diff hist -465 PriusPlus-Electronic →Configuration: removed pi-prius can-view settings (confusing)
- 02:40, 22 May 2007 diff hist +369 Talk:PriusPlus-Electrical added some todo (not complete)
- 02:22, 22 May 2007 diff hist +94 Talk:PriusPlus-Mechanical rewrote todo
- 02:15, 22 May 2007 diff hist +393 PriusPlus-Electrical →Contactors: snubber text from mechanical page
- 02:14, 22 May 2007 diff hist -1,386 PriusPlus-Mechanical →Mechanical Sub Parts List: moved to discussion page as a todo list, moved sections
- 02:13, 22 May 2007 diff hist +1,084 N Talk:PriusPlus-Mechanical starting some todo's
- 02:02, 22 May 2007 diff hist -738 PriusPlus rm'd other conversion options (on PHEV page), streamlined intro and brought up to date
- 01:57, 22 May 2007 diff hist -57 Template:PriusPlus-Doc Process bringing up to date
- 01:51, 22 May 2007 diff hist -1,448 PriusPlus →Preliminary Information: Bringing up to date and starting major re-organization
- 01:38, 22 May 2007 diff hist +1,029 PriusPlus-Theory →The PHEV Battery Pack: moved stuff from the PriusPlus page here
- 00:48, 22 May 2007 diff hist -52 Template:PriusPlus-Doc Process Temporarly removing "DIY Instructions" - its causing confusion - will add back later
- 02:08, 3 May 2007 diff hist +418 Prius PHEV →Current Vehicles: more PHEVs
- 20:30, 29 April 2007 diff hist +48 PriusPlus-Theory →HVD1: ice can heat diode too
- 13:36, 28 April 2007 diff hist -95 PriusPlus-Electronic →Installation: removed todo items that are done
- 04:35, 28 April 2007 diff hist +85 PriusPlus-Electronic →Assembly Steps: Added control board layout
- 04:31, 28 April 2007 diff hist +13 N File:EAA-PHEV-PRIUS-ControlBd layout.png V4.3_20070904 current
- 03:14, 27 April 2007 diff hist +5,540 User:Cewert Added my photos current
- 03:12, 27 April 2007 diff hist +1,802 PriusPlus-RawData →Photos from Chris Ewert's Conversion: added more photos
- 00:15, 27 April 2007 diff hist +33 User talk:Cewert
- 00:13, 27 April 2007 diff hist +104 N File:Low voltage wiring inside OEM Battery modified.jpg Modified wiring inside the OEM battery. This is for the charge interlock system and the ready wire tap. current
- 00:12, 27 April 2007 diff hist +109 N File:Low voltage wiring inside OEM Battery.jpg Unmodified low voltage wiring inside OEM battery. Shows green wires from contactors going to chassis ground. current
- 00:10, 27 April 2007 diff hist +56 N File:Inside OEM battery after tie in.jpg Inside the OEM battery after the HV tie in is completed. current
- 00:09, 27 April 2007 diff hist +68 N File:Inside OEM battery from back of car.jpg The inside of the OEM battery from the rear of the car (unmodified.) current
- 00:07, 27 April 2007 diff hist +72 N File:Opening OEM battery.jpg Opening up the OEM battery (make sure to disconnect service plug FIRST!) current
- 00:04, 27 April 2007 diff hist +88 N File:OEM battery exposed.jpg The OEM battery, almost ready to be unscrewed (service plug must be disconnected first.) current
- 00:01, 27 April 2007 diff hist +61 N File:Removing rear drivers side seat top.jpg Removing the rear drivers side seat to access the OEM battery current
- 23:59, 26 April 2007 diff hist +54 N File:Removing carpeting from top of OEM battery.jpg Removing the carpeting from the top of the OEM battery current
- 23:58, 26 April 2007 diff hist +58 N File:OEM Battery Hold Down Screw.jpg Bolts holding down the carpeting on top of the OEM battery current
- 23:48, 26 April 2007 diff hist +86 N File:Batt box top modified for alt mounting method.jpg The battery box top after it was modified for use with the alturnative mouting method. current
- 23:46, 26 April 2007 diff hist +77 N File:Batteries being installed 2.jpg Batteries being installed on Chris Ewert's conversion - alt. mounting method. current
- 23:45, 26 April 2007 diff hist +70 N File:Batteries being installed 1.jpg Batteries being installed (alt. mounting method in Chris Ewert's car.) current
- 23:43, 26 April 2007 diff hist +43 N File:PriusPlus control board unstuffed back.jpg Back of PriusPlus control board - unstuffed current
- 23:42, 26 April 2007 diff hist +44 N File:PriusPlus control board unstuffed front.jpg Front of PriusPlus control board - unstuffed current
- 23:35, 26 April 2007 diff hist +55 N File:Zivan NG3 Charger connected.jpg Alt. mounting method, shows wiring to ZiVan NG3 charger current
- 23:32, 26 April 2007 diff hist -48 PriusPlus-RawData →Schematics: removed dead link
- 23:30, 26 April 2007 diff hist +29 N File:Fuses in electronics box.jpg Fuses in the electronics box. current
- 23:29, 26 April 2007 diff hist +71 N File:Electronics box being assembled.jpg Assembling the electronics box: its taped together awaiting epoxy glue current
- 23:25, 26 April 2007 diff hist +46 N File:Right side of electronics box.jpg Shows the right outside of the electronics box current
- 23:21, 26 April 2007 diff hist +45 N File:Left side of electronics box.jpg Shows the left outside of the electronics box current
- 23:19, 26 April 2007 diff hist +69 N File:Contactors in electronics box.jpg Shows the contactors, snubbers and disconnect for OEM battery tie-in. current
- 23:17, 26 April 2007 diff hist +64 N File:HVD1 in electronics box.jpg Alt. mounting method, shows HVD1 wired up in the electronics box current
- 23:16, 26 April 2007 diff hist +105 N File:Electronics Box And Charger in Tire Well 2.jpg Alt. mounting method, electronics box and charger in tire well with top on HV section of electronics box. current
- 23:13, 26 April 2007 diff hist +42 N File:Electronics Box And Charger in Tire Well.jpg Alt. mounting method lower level complete. current
- 03:10, 25 April 2007 diff hist +307 PriusPlus-Electronic added oem battery fan control schematics; started section
- 03:07, 25 April 2007 diff hist +37 N File:EAA-PHEV-PRIUS-FanCtlSchematic.png For control board version V4.2_070217 current
- 03:00, 25 April 2007 diff hist +37 N File:EAA-PHEV-PRIUS-FanCtlSchematic.zip For Control Board Version V4.2_070217 current
- 02:55, 25 April 2007 diff hist +1,156 PriusPlus-Theory →OEM Battery Fan Controls: Changed old description to Ron's new one
- 03:45, 10 April 2007 diff hist -14 PriusPlus-Electronic →Control Board: takes 6-8 hours
- 21:07, 9 April 2007 diff hist -4 Template:EAA-PHEV-PRIUS-ControlBdPartsList R15 is not a 1k, its 200k
- 21:05, 9 April 2007 diff hist +4 Template:EAA-PHEV-PRIUS-ControlBdPartsList U7 needs a 14 pin dip socket
- 19:22, 9 April 2007 diff hist +110 PriusPlus-Electrical →Electronics Tray: digikey mating connectors parts list
- 03:53, 4 April 2007 diff hist +160 Prius PHEV →Current Vehicles: Chris Ewert's Conversion
- 02:36, 4 April 2007 diff hist +1,126 PriusPlus-Theory →Control Circuit Board: Explination of OEM battery fan operation in modification
- 19:30, 30 March 2007 diff hist +738 PriusPlus-Electrical Reorganized, added sections and started diode information
- 18:32, 30 March 2007 diff hist +46 PriusPlus-Electrical →Parts Needed: Added PP75 connector photos, power supply not in electronics tray
- 22:25, 28 March 2007 diff hist +51 N File:PP75 Connectors.jpg PowerPole 75 amp connector housings and 8AWG crimps current
- 22:25, 28 March 2007 diff hist +39 N File:DO-5 Diode.jpg The DO-5 Diode as it comes from DigiKey current
- 19:38, 28 March 2007 diff hist 0 m PriusPlus-Electronic moved LED schematics to LED board section
- 20:50, 27 March 2007 diff hist -11 Template:EAA-PHEV-PRIUS-ControlBdPartsList Updated 10M resistor
- 20:47, 27 March 2007 diff hist +22 Template:EAA-PHEV-PRIUS-ControlBdPartsList DB15 changed, RN8 removed, added 1K and 10K resistors
- 20:08, 27 March 2007 diff hist +24 PriusPlus-Theory →The CAN-View
- 19:07, 27 March 2007 diff hist +24 PriusPlus-Theory →HVD1
- 19:02, 27 March 2007 diff hist -50 PriusPlus-Theory →The CAN-View: conversion does use CAN-View RL1
- 19:13, 26 March 2007 diff hist +935 PriusPlus-Theory Started HV electrical parts theory
- 15:25, 21 March 2007 diff hist +61 N File:Electronics Box Partial 2.jpg Partially completed electronics box for alt. mounting method. current
- 15:23, 21 March 2007 diff hist +84 N File:Electronics Box Partial 1.jpg Mostly completed electronics box without top. This is for the alt. mounting method. current
- 21:44, 20 March 2007 diff hist +58 N File:Entire alt batt box mounting supports.jpg Alt. mounting method. Shows supports with trays in place. current
- 21:42, 20 March 2007 diff hist +67 N File:Rubber on center batt box support.jpg Alt mounting method. Shows rubber pads on the battery box support. current
- 21:41, 20 March 2007 diff hist +61 N File:Left side battery box supports alt method.jpg Alt mounting method. Shows left side of battery box supports current
- 21:40, 20 March 2007 diff hist +51 N File:Right side battery box supports alt method.jpg Alt. mounting method. Shows right side of supports current
- 21:39, 20 March 2007 diff hist +93 N File:Alt method support angle irons.jpg Alt. mounting method showing all angle irons (does not have angle iron on center support yet. current
- 21:37, 20 March 2007 diff hist +57 N File:Welded angle iron 2.jpg Shows just the welded angle iron for alt. mounting method current
- 21:36, 20 March 2007 diff hist +96 N File:Welded angle iron 1.jpg The welded steel angle iron is supporting the aluminum angle irons that support the battery box. current
- 19:50, 20 March 2007 diff hist +40 File:Charger in tirewell.JPG current
- 19:49, 20 March 2007 diff hist +99 N File:Charger in tirewell.JPG Alt. mounting method. Charger is in tire well on steel sheet. Also shows outter batt box supports
- 22:07, 16 March 2007 diff hist +327 PriusPlus-Theory →The CAN-View: basic relay info
- 15:42, 16 March 2007 diff hist +1,001 Talk:PriusPlus-Electronic Discussion
- 20:17, 12 March 2007 diff hist +777 N Talk:PriusPlus-Electronic todo
- 19:49, 12 March 2007 diff hist +148 Talk:PriusPlus-Electrical todo
- 19:30, 12 March 2007 diff hist -164 PriusPlus-Electronic moving TODO to discussion page
- 19:25, 12 March 2007 diff hist +14 PriusPlus-Electronic →Control Board
- 19:08, 12 March 2007 diff hist +143 PriusPlus-Electrical →Electrical Final Placement and Connections
- 15:49, 12 March 2007 diff hist -30 PriusPlus-Electronic →Parts List: moved HV list to Electrical
- 15:23, 12 March 2007 diff hist +17 PriusPlus-Electrical →Warning & Tips: disclaimer
- 15:22, 12 March 2007 diff hist -236 PriusPlus-Electrical →Electrical Parts List and Descriptions: removed components listed below
- 15:20, 12 March 2007 diff hist +51 PriusPlus-Electrical →Parts Needed: added digikey parts list
- 15:19, 12 March 2007 diff hist +60 PriusPlus-Electrical →Parts Needed: added batteries
- 15:16, 12 March 2007 diff hist -1,377 m Template:EAA-PHEV-PRIUS-HVPartsList formatting
- 15:07, 12 March 2007 diff hist +64 PriusPlus-Electronic →Parts List: Added new parts list templates
- 15:06, 12 March 2007 diff hist -22,386 Template:EAA-PHEV-PRIUS-ControlBdPartsList updated DB15 connector; moved LED board / HV lists to new templates
- 15:00, 12 March 2007 diff hist +13,373 N Template:EAA-PHEV-PRIUS-HVPartsList Started HV electrical parts list template (not complete yet)
- 14:56, 12 March 2007 diff hist +12,629 N Template:EAA-PHEV-PRIUS-LEDBdPartsList Pulled out LED board parts into new list
- 03:20, 11 March 2007 diff hist -6 m PriusPlus-Mechanical →Assembly Steps: typo
- 15:42, 8 March 2007 diff hist +203 Prius PHEV →Current Vehicles: Added a few conversions from CalCars website
- 21:26, 6 March 2007 diff hist +141 Prius PHEV →Current Vehicles: added DUAL PWR-PHEV
- 13:51, 6 March 2007 diff hist 0 m Prius PHEV →Add A Vehicle: spelling
- 03:18, 5 March 2007 diff hist +57 PriusPlus-Electrical →Electrical Parts List and Descriptions: added new headers
- 02:55, 5 March 2007 diff hist +1 m PriusPlus-Electrical →Parts Needed
- 02:52, 5 March 2007 diff hist +60 PriusPlus-Electrical →Parts Needed: added heaters
- 02:06, 4 March 2007 diff hist +107 PriusPlus-Electrical →Parts Needed: Added DigiKey parts list for electrical
- 02:03, 4 March 2007 diff hist +127 PriusPlus-Electronic →Control Board: added Ron's tool list
- 01:51, 4 March 2007 diff hist +868 PriusPlus-Electronic →CAN-View & EV Mode button
- 20:50, 27 February 2007 diff hist 0 m PriusPlus-Mechanical →Battery Box Supports
- 20:48, 27 February 2007 diff hist -82 PriusPlus-Electrical →Electrical Parts List and Descriptions: moved to list below
- 20:07, 27 February 2007 diff hist +65 PriusPlus-Electrical →Parts Needed: Seperated Anderson housings from crimps, added fan
- 19:59, 27 February 2007 diff hist -66 PriusPlus-Electrical →Electrical Parts List and Descriptions: Removed components no longer necessary
- 19:40, 27 February 2007 diff hist -278 PriusPlus-Electrical →Parts Needed: Removed DigiKey parts, adding into new list
- 05:41, 26 February 2007 diff hist +332 PriusPlus-Electronic →Control Board: Started organizing info, added parts lists
- 22:37, 25 February 2007 diff hist -246 PriusPlus-Electronic →TODO: removed stuff already done
- 22:24, 25 February 2007 diff hist +108 PriusPlus-Electronic →Parts List: Added link to DigiKey parts list
- 16:52, 23 February 2007 diff hist +110 PriusPlus-Theory →Control Circuit Board: clean-up
- 18:10, 19 February 2007 diff hist +48 Template:EAA-PHEV-PRIUS-ControlBdPartsList Digikey min order for 1/4 watt resistors is qty 10
- 18:07, 19 February 2007 diff hist 0 Template:EAA-PHEV-PRIUS-ControlBdPartsList Corrected 2.2k resistor digikey part number
- 04:39, 14 February 2007 diff hist +1,723 PriusPlus-RawData Optional batt box mounting method
- 03:25, 14 February 2007 diff hist +397 PriusPlus-RawData Added more photos from my conversion (starting alt. batt box mounting method.)
- 23:01, 13 February 2007 diff hist +176 N Talk:PriusBlue Mileage
- 04:15, 13 February 2007 diff hist +99 N File:Batt box test fit forward design.JPG Test fitting (and partially mounted) battery box. The battery box is moved as forward as possible. current
- 04:13, 13 February 2007 diff hist +65 N File:Bracket on OEM Batt screw.JPG Bracket on OEM battery mounts I used to hold down new battery box current
- 04:09, 13 February 2007 diff hist +58 N File:Batt Box with screw lift supports.JPG Battery box set together with supports for screw lift idea current
- 04:07, 13 February 2007 diff hist +34 N File:P1240040.JPG Battery box from side set together current
- 19:07, 15 January 2007 diff hist +234 PriusPlus-Electrical →Parts Needed: Updated list
- 19:45, 12 January 2007 diff hist +145 PriusPlus-Electrical →Electrical Parts List and Descriptions: Added photos of parts
- 19:41, 12 January 2007 diff hist +20 N File:JTN60060 Fuse Holder.JPG JTN60060 Fuse Holder current
- 19:39, 12 January 2007 diff hist +24 N File:LPJ-60SP.JPG The 60 amp LPJ-60SP fuse current
- 19:20, 12 January 2007 diff hist +226 PriusPlus-RawData →Photos from Chris Ewert's Conversion: Added component photos
- 19:06, 12 January 2007 diff hist +40 N File:EV200 Contactor.JPG The Kilovac EV200A4ANA (EV200) contactor current
- 19:05, 12 January 2007 diff hist +25 N File:Bottom of JTN60060.JPG Bottom of the fuse holder current
- 19:03, 12 January 2007 diff hist +35 N File:Fuse in holder.JPG Installing the fuse into the holder current
- 19:01, 12 January 2007 diff hist +21 N File:Fuses and Holders.JPG The fuses and holders current
- 04:21, 11 January 2007 diff hist +754 Template talk:Prius PHEV Options Re: Spill proof Lead-Acid?
- 02:18, 8 January 2007 diff hist -74,627 Talk:Main Page spam
- 20:17, 5 January 2007 diff hist +122 PriusPlus-Electrical →Electrical Parts List and Descriptions: Added parts
- 04:38, 3 January 2007 diff hist +1,254 PriusPlus-Electrical →Electrical Parts List and Descriptions
- 22:03, 1 January 2007 diff hist -609 PriusPlus-Theory →Control Circuit Board: Simplification & corrections
- 21:36, 1 January 2007 diff hist +306 PriusPlus-Theory →The CAN-View
- 20:14, 1 January 2007 diff hist +3,784 PriusPlus-Theory →The PHEV Battery Pack
- 04:32, 24 December 2006 diff hist -98 PriusPlus-Electrical Oops, put stuff in the wrong sections
- 04:30, 24 December 2006 diff hist +1 m PriusPlus-Electrical Minor mistake
- 04:30, 24 December 2006 diff hist +2,385 PriusPlus-Electrical Added more categories and tips for safe battery handling
- 03:35, 24 December 2006 diff hist +796 PriusPlus-Mechanical Started battery box base documentation
- 03:21, 24 December 2006 diff hist +1 m PriusPlus-Mechanical Minor mistake
- 03:20, 24 December 2006 diff hist +1 m PriusPlus-Mechanical →Parts Needed
- 03:20, 24 December 2006 diff hist +4,868 PriusPlus-Mechanical Added battery box top instructions and photos
- 02:41, 24 December 2006 diff hist +695 PriusPlus-Mechanical cleaned up and added measurements to battery tray instructions
- 18:02, 22 December 2006 diff hist +1,006 PriusPlus-Mechanical Started Battery Box Top Documentation
- 17:46, 22 December 2006 diff hist +414 PriusPlus-Mechanical →Battery Trays
- 20:37, 18 December 2006 diff hist +836 PriusPlus-RawData Added more photos to Chris Ewert's conversion
- 23:02, 17 December 2006 diff hist +247 N File:Mostly Finished Batt Box.JPG Mostly finished battery box. Holes still need to be drilled into the angle irons to bolt down, and bolts will be added in the middle between the trays to bolt the top of the pack to the bottom. Also, mounting frame is not completely cut to size. current
- 22:57, 17 December 2006 diff hist +100 N File:Finished Corner.JPG Finished corner with ground of screws. I'm pretty sure this isn't done the official CalCars method. current
- 22:56, 17 December 2006 diff hist +180 N File:Binding Posts Ground Down.JPG These are the binding posts I choose to use. The one on the left is ground down to fit and the burs are also ground off. I'm sure there is a better way to do this, but it worked. current
- 22:54, 17 December 2006 diff hist +93 N File:Inside Corner.JPG Inside the corner bracket. The machine screws are counter sunk into the aluminum angle iron. current
- 22:53, 17 December 2006 diff hist +128 N File:Batt Box with Bolt Down Angle.JPG Corner bracket in place and screwed down on the top. Ready to drill holes in the side and bolt down the bracket from the sides. current
- 22:51, 17 December 2006 diff hist +264 N File:Plexiglass Shield.JPG I choose to install a plexiglass 'shield' on the side of the aluminum angle iron to reduce the risk of a wire / terminal hitting the aluminum and arcing. I am not sure if that is in the official CalCars plans or not. It is held in by non-conductive nylo current
- 22:43, 17 December 2006 diff hist +81 N File:Batt Box Top 3 Angles.JPG Aluminum angle irons cut with 45 degree angles and laid on top of the battery box current
- 15:40, 15 December 2006 diff hist +1,539 PriusPlus-RawData Added Chris's Battery Box Photos
- 05:34, 15 December 2006 diff hist +88 N File:Top Battery Box With Corner Bracket.JPG Corner bracket is just sitting on the top of the battery box waiting to be screwed down. current
- 05:33, 15 December 2006 diff hist +73 N File:Top Battery Box 45 Degree Cuts.JPG The aluminum angle irons are cut with 45 degree angles so they fit snugly current
- 05:31, 15 December 2006 diff hist +80 N File:Starting on the Top of Battery Box.JPG Bottom is mostly assembled, now starting on cutting the angle irons for the top. current
- 05:29, 15 December 2006 diff hist +73 N File:2 Trays with Some Supports.JPG 2 of the trays sitting on 2 1-1/2 angle irons (others just sitting there) current
- 05:19, 15 December 2006 diff hist 0 N File:4 Finished Trays.JPG current
- 05:18, 15 December 2006 diff hist 0 N File:Finished Tray.JPG current
- 05:17, 15 December 2006 diff hist +221 N File:Screws Sticking Through Partially Assembled Tray.JPG I used extra long, self threading screws, so they stick through. I used a hacksaw first, and then a dremel with a metal cut off attachment to cut the screws at the base. Then used a grinder to grind them perfectly flat. current
- 05:14, 15 December 2006 diff hist +76 N File:Closeup of Sample Finished Corner.JPG This is just a sample I tried on a scrap pieces before doing the real thing. current
- 05:12, 15 December 2006 diff hist +241 N File:Holes drilled in aluminum.JPG Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit. current
- 05:10, 15 December 2006 diff hist +34 N File:Tray Parts Laid Out.JPG All the parts of one tray laid out current
- 05:08, 15 December 2006 diff hist +82 N File:Dremel Drill Press.JPG This is the Dremel drill press I used to drill the small holes in the angle irons. current
- 05:06, 15 December 2006 diff hist 0 N File:Almost Finished Tray Jig.JPG current
- 05:04, 15 December 2006 diff hist +45 N File:Making Tray Jig Step 3.JPG Place wood to hold the channel irons in place current
- 05:02, 15 December 2006 diff hist +97 N File:Making Tray Jig Step 1.JPG Step one is to place wood around the outsides of the angle iron to hold the angle irons in place. current
- 05:01, 15 December 2006 diff hist +100 N File:Making Tray Jig Step 2.JPG The set together tray with batteries and wood secured in placed around the outsides to form the jig. current
- 04:58, 15 December 2006 diff hist +136 N File:Tray Ready for Jig.JPG This photo is of the tray set together on a sheet of plywood (wich will be used as a jig to hold everything in place for drilling holes. current
- 04:56, 15 December 2006 diff hist 0 N File:Tray Set Together Close Up.JPG current
- 04:55, 15 December 2006 diff hist 0 N File:Tray Set Together With Battery.JPG current
- 04:54, 15 December 2006 diff hist +70 N File:Tray Pieces.JPG These are all the aluminum pieces needed to build the 4 battery trays. current
- 04:51, 15 December 2006 diff hist 0 N File:Cutting Aluminum.JPG current