|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 00:07, 27 April 2007 | Opening OEM battery.jpg (file) |  |
692 KB | Cewert | Opening up the OEM battery (make sure to disconnect service plug FIRST!) | 1 |
| 00:04, 27 April 2007 | OEM battery exposed.jpg (file) |  |
693 KB | Cewert | The OEM battery, almost ready to be unscrewed (service plug must be disconnected first.) | 1 |
| 00:01, 27 April 2007 | Removing rear drivers side seat top.jpg (file) |  |
713 KB | Cewert | Removing the rear drivers side seat to access the OEM battery | 1 |
| 23:59, 26 April 2007 | Removing carpeting from top of OEM battery.jpg (file) |  |
672 KB | Cewert | Removing the carpeting from the top of the OEM battery | 1 |
| 23:58, 26 April 2007 | OEM Battery Hold Down Screw.jpg (file) |  |
152 KB | Cewert | Bolts holding down the carpeting on top of the OEM battery | 1 |
| 23:51, 26 April 2007 | Right side of electronics box.jpg (file) |  |
1.26 MB | Cewert | 1 | |
| 23:48, 26 April 2007 | Batt box top modified for alt mounting method.jpg (file) |  |
700 KB | Cewert | The battery box top after it was modified for use with the alturnative mouting method. | 1 |
| 23:46, 26 April 2007 | Batteries being installed 2.jpg (file) |  |
688 KB | Cewert | Batteries being installed on Chris Ewert's conversion - alt. mounting method. | 1 |
| 23:45, 26 April 2007 | Batteries being installed 1.jpg (file) |  |
707 KB | Cewert | Batteries being installed (alt. mounting method in Chris Ewert's car.) | 1 |
| 23:43, 26 April 2007 | PriusPlus control board unstuffed back.jpg (file) |  |
705 KB | Cewert | Back of PriusPlus control board - unstuffed | 1 |
| 23:42, 26 April 2007 | PriusPlus control board unstuffed front.jpg (file) |  |
714 KB | Cewert | Front of PriusPlus control board - unstuffed | 1 |
| 23:35, 26 April 2007 | Zivan NG3 Charger connected.jpg (file) |  |
673 KB | Cewert | Alt. mounting method, shows wiring to ZiVan NG3 charger | 1 |
| 23:30, 26 April 2007 | Fuses in electronics box.jpg (file) |  |
1.5 MB | Cewert | Fuses in the electronics box. | 1 |
| 23:29, 26 April 2007 | Electronics box being assembled.jpg (file) |  |
1.2 MB | Cewert | Assembling the electronics box: its taped together awaiting epoxy glue | 1 |
| 23:21, 26 April 2007 | Left side of electronics box.jpg (file) |  |
1.18 MB | Cewert | Shows the left outside of the electronics box | 1 |
| 23:19, 26 April 2007 | Contactors in electronics box.jpg (file) |  |
1.37 MB | Cewert | Shows the contactors, snubbers and disconnect for OEM battery tie-in. | 1 |
| 23:17, 26 April 2007 | HVD1 in electronics box.jpg (file) |  |
1.49 MB | Cewert | Alt. mounting method, shows HVD1 wired up in the electronics box | 1 |
| 23:16, 26 April 2007 | Electronics Box And Charger in Tire Well 2.jpg (file) |  |
1.51 MB | Cewert | Alt. mounting method, electronics box and charger in tire well with top on HV section of electronics box. | 1 |
| 23:13, 26 April 2007 | Electronics Box And Charger in Tire Well.jpg (file) |  |
1.55 MB | Cewert | Alt. mounting method lower level complete. | 1 |
| 03:00, 25 April 2007 | EAA-PHEV-PRIUS-FanCtlSchematic.zip (file) |  |
3 KB | Cewert | For Control Board Version V4.2_070217 | 1 |
| 20:26, 15 April 2007 | EAA-PHEV-PRIUS-ControlBdSchematic.zip (file) | |
123 KB | Cewert | V4.3_070316 | 6 |
| 20:23, 15 April 2007 | EAA-PHEV-PRIUS-ControlBdSchematic.png (file) |  |
137 KB | Cewert | v4.3_070316 | 7 |
| 08:10, 31 March 2007 | PiPrius CAN-View Set-RL6.png (file) |  |
1.08 MB | Rjf | Suggested PiPrius CAN-View RL6 (Relay 6) settings. | 1 |
| 08:10, 31 March 2007 | PiPrius CAN-View Set-RL5.png (file) |  |
1.01 MB | Rjf | Suggested PiPrius CAN-View RL5 (Relay 5) settings. | 1 |
| 08:10, 31 March 2007 | PiPrius CAN-View Set-RL3.png (file) |  |
1.01 MB | Rjf | Suggested PiPrius CAN-View RL3 (Relay 3) settings. | 1 |
| 08:09, 31 March 2007 | PiPrius CAN-View Set-RL2.png (file) |  |
1.01 MB | Rjf | Suggested PiPrius CAN-View RL2 (Relay 2) settings. | 1 |
| 08:09, 31 March 2007 | PiPrius CAN-View Set-PHEV.png (file) |  |
1.03 MB | Rjf | Suggested PiPrius CAN-View PHEV settings. | 1 |
| 08:08, 31 March 2007 | PiPrius CAN-View PHEV2.png (file) |  |
1 MB | Rjf | Suggested PiPrius CAN-View PHEV Page2 layout. | 1 |
| 08:08, 31 March 2007 | PiPrius CAN-View PHEV1.png (file) |  |
1,014 KB | Rjf | Suggested PiPrius CAN-View PHEV Page1 layout. | 1 |
| 22:25, 28 March 2007 | PP75 Connectors.jpg (file) |  |
30 KB | Cewert | PowerPole 75 amp connector housings and 8AWG crimps | 1 |
| 22:25, 28 March 2007 | DO-5 Diode.jpg (file) |  |
112 KB | Cewert | The DO-5 Diode as it comes from DigiKey | 1 |
| 14:22, 22 March 2007 | EscapeBlowerSpeed.gif (file) |  |
4 KB | DavideAndrea | Ford Escape Hybrid - Blower speed vs car speed | 1 |
| 15:25, 21 March 2007 | Electronics Box Partial 2.jpg (file) |  |
717 KB | Cewert | Partially completed electronics box for alt. mounting method. | 1 |
| 15:23, 21 March 2007 | Electronics Box Partial 1.jpg (file) |  |
679 KB | Cewert | Mostly completed electronics box without top. This is for the alt. mounting method. | 1 |
| 21:44, 20 March 2007 | Entire alt batt box mounting supports.jpg (file) |  |
622 KB | Cewert | Alt. mounting method. Shows supports with trays in place. | 1 |
| 21:42, 20 March 2007 | Rubber on center batt box support.jpg (file) |  |
629 KB | Cewert | Alt mounting method. Shows rubber pads on the battery box support. | 1 |
| 21:41, 20 March 2007 | Left side battery box supports alt method.jpg (file) |  |
622 KB | Cewert | Alt mounting method. Shows left side of battery box supports | 1 |
| 21:40, 20 March 2007 | Right side battery box supports alt method.jpg (file) |  |
633 KB | Cewert | Alt. mounting method. Shows right side of supports | 1 |
| 21:39, 20 March 2007 | Alt method support angle irons.jpg (file) |  |
614 KB | Cewert | Alt. mounting method showing all angle irons (does not have angle iron on center support yet. | 1 |
| 21:37, 20 March 2007 | Welded angle iron 2.jpg (file) |  |
647 KB | Cewert | Shows just the welded angle iron for alt. mounting method | 1 |
| 21:36, 20 March 2007 | Welded angle iron 1.jpg (file) |  |
637 KB | Cewert | The welded steel angle iron is supporting the aluminum angle irons that support the battery box. | 1 |
| 19:49, 20 March 2007 | Charger in tirewell.JPG (file) |  |
703 KB | Cewert | Alt. mounting method. Charger is in tire well on steel sheet. Also shows outter batt box supports | 1 |
| 00:54, 18 March 2007 | Escape contactors ckt.gif (file) |  |
12 KB | DavideAndrea | Ford Escape Hybrid - circuit of Traction Battery contactors | 1 |
| 22:38, 17 March 2007 | Escape ImmediateShutdown ckt.gif (file) |  |
9 KB | DavideAndrea | Ford Escape Hybrid - circuit for the Immediate Shutdown | 1 |
| 08:34, 5 March 2007 | EAA-PHEV-PRIUS-ControlBdPartsList.zip (file) | |
8 KB | Rjf | ControlBd V4.2_070217 | 4 |
| 20:53, 3 March 2007 | PriusContactorSequence.gif (file) |  |
25 KB | DavideAndrea | Added Ready and Ignition wavefirms | 3 |
| 00:46, 2 March 2007 | GrayPearl-MPG Temp.jpg (file) |  |
33 KB | Rjf | Mileage log for Todd Dore's GrayPearl, this image is from the Image:GrayPearl Mileage Log.zip spreadsheet. | 1 |
| 00:46, 2 March 2007 | GrayPearl-MPG Date.jpg (file) |  |
38 KB | Rjf | Mileage log for Todd Dore's GrayPearl, this image is from the Image:GrayPearl Mileage Log.zip spreadsheet. | 1 |
| 00:42, 2 March 2007 | GrayPearl Mileage Log.zip (file) | |
166 KB | Rjf | Mileage log for Todd Dore's GreyPearl, this .zip contains .xls and .ods spreadsheets. | 1 |
| 04:15, 13 February 2007 | Batt box test fit forward design.JPG (file) |  |
696 KB | Cewert | Test fitting (and partially mounted) battery box. The battery box is moved as forward as possible. | 1 |
