|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 01:23, 23 June 2007 | Electronics Box Assembly - Side Vents.jpg (file) |  |
1.41 MB | Cewert | Shows the assembly of the electronics box | 1 |
| 01:20, 23 June 2007 | Electronics Box Assembly Mounting Components.jpg (file) |  |
1.42 MB | Cewert | The electronics box being constructed | 1 |
| 15:36, 16 June 2007 | Electronics Box Alternative.png (file) |  |
10 KB | Cewert | First version of the electronics box layout | 1 |
| 23:34, 15 June 2007 | EAAad.gif (file) |  |
12 KB | Rjf | The [http://eaaev.org Electric Auto Association] (EAA) was formed in 1967 in San Jose, California. The EAA is a non-profit educational organization that promotes the advancement and widespread adoption of Electric Vehicles. [[Battery electric vehicl | 1 |
| 01:48, 10 June 2007 | Electronics Tray Classic.png (file) |  |
18 KB | Cewert | Diagram of the electronics tray (Classic mouting method) | 1 |
| 01:11, 10 June 2007 | Alt Mounting Diagram.png (file) |  |
34 KB | Cewert | Small revisions | 2 |
| 18:53, 9 June 2007 | Finished Alt Mounting Method.jpg (file) |  |
584 KB | Cewert | Shows the Alt. mounting method trim finished with bumper inlet. | 1 |
| 01:08, 26 May 2007 | IMG 1215.jpg (file) |  |
222 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:08, 26 May 2007 | IMG 1208.jpg (file) |  |
232 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:08, 26 May 2007 | IMG 1205.jpg (file) |  |
249 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:08, 26 May 2007 | IMG 1190.jpg (file) |  |
215 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:08, 26 May 2007 | IMG 1188.jpg (file) |  |
201 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:07, 26 May 2007 | IMG 1187.jpg (file) |  |
214 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:07, 26 May 2007 | IMG 1186.jpg (file) |  |
208 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:07, 26 May 2007 | IMG 1179.jpg (file) |  |
225 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:07, 26 May 2007 | IMG 1171.jpg (file) |  |
214 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:07, 26 May 2007 | IMG 1154 2.jpg (file) |  |
181 KB | Rjf | From the 2007 Maker Faire, photo provided by Felix of [http://www.calcars.org CalCars.org] | 1 |
| 01:43, 25 May 2007 | OEM Battery Fan Wiring - Stripped Back.jpg (file) |  |
650 KB | Cewert | The OEM battery fan wiring stripped back to expose the wires. | 1 |
| 01:42, 25 May 2007 | OEM Battery Fan Wiring.jpg (file) |  |
530 KB | Cewert | Shows the origional, unmodified OEM battery fan wiring. | 1 |
| 01:37, 25 May 2007 | OEM Battery Fan Modification - New Wiring.jpg (file) |  |
673 KB | Cewert | Shows the new wiring added to the OEM battery fan. | 1 |
| 01:35, 25 May 2007 | OEM Battery Fan Modification - Diode Mounting 2.jpg (file) |  |
677 KB | Cewert | A ladder approach to mounting the diodes for the OEM battery fan override modification. | 1 |
| 01:33, 25 May 2007 | OEM Battery Fan Modification - Diode Mounting 1.jpg (file) |  |
689 KB | Cewert | One way to mount the diodes for the OEM battery fan override modification | 1 |
| 01:19, 25 May 2007 | Diode Mounted on Heatsink - Front.jpg (file) |  |
637 KB | Cewert | Front side of the Diode mounted on the heatsink. | 1 |
| 01:18, 25 May 2007 | Diode Mounted on Heatsink - Rear.jpg (file) |  |
663 KB | Cewert | The back of the heatsink with the diode mounted. | 1 |
| 01:17, 25 May 2007 | Nylon Spacer.jpg (file) |  |
668 KB | Cewert | Nylon spacer for heatsink shown next to the nylon spacer it was made from | 1 |
| 01:15, 25 May 2007 | Heatsink with Hole and Spacer.jpg (file) |  |
670 KB | Cewert | Heatsink including the nylon spacer | 1 |
| 01:13, 25 May 2007 | Heatsink with Hole.jpg (file) |  |
646 KB | Cewert | Heatsink with hole drilled in center. | 1 |
| 16:35, 22 May 2007 | Maker Faire 2007 6.jpg (file) |  |
650 KB | Cewert | From the 2007 Maker Faire | 1 |
| 16:34, 22 May 2007 | Maker Faire 2007 5.jpg (file) |  |
667 KB | Cewert | From the 2007 Maker Faire | 1 |
| 16:33, 22 May 2007 | Maker Faire 2007 4.jpg (file) |  |
680 KB | Cewert | From the 2007 Maker Faire | 1 |
| 16:32, 22 May 2007 | Maker Faire 2007 3.jpg (file) |  |
605 KB | Cewert | From the 2007 Maker Faire | 1 |
| 16:30, 22 May 2007 | Maker Faire 2007 2.jpg (file) |  |
602 KB | Cewert | From the 2007 Maker Faire | 1 |
| 16:29, 22 May 2007 | Maker Faire 2007 1.jpg (file) |  |
704 KB | Cewert | From the 2007 Maker Faire | 1 |
| 09:41, 14 May 2007 | DSC00353.JPG (file) |  |
973 KB | Rjf | The modular version of the PiPrius battery box with lexan cover installed. Interlock box module on far left and four battery bank modules. Each battery bank contains six 12v ~20Ah batteries and a battery regulator trays. | 1 |
| 09:29, 14 May 2007 | DSC00338.JPG (file) |  |
935 KB | Rjf | Battery regulators for the PiPrius modular battery box. | 1 |
| 09:28, 14 May 2007 | DSC00341.JPG (file) |  |
1 MB | Rjf | Battery regulators for the PiPrius modular battery box. | 1 |
| 09:23, 14 May 2007 | DSC00343.JPG (file) |  |
1.04 MB | Rjf | The modular version of the PiPrius battery box. Interlock box module on far left and four battery bank modules. Each battery bank contains six 12v ~20Ah batteries and a battery regulator trays. | 1 |
| 09:19, 14 May 2007 | DSC00238.JPG (file) |  |
1.01 MB | Rjf | The fitted cubby area version of the PiPrius interlock box. | 1 |
| 09:15, 14 May 2007 | DSC00062.JPG (file) |  |
1.07 MB | Rjf | An early version of the PiPrius interlock box. | 1 |
| 05:12, 11 May 2007 | P12345 makerfaire 09 overview.pdf.jpg (file) |  |
191 KB | Rjf | slightly larger version | 1 |
| 10:19, 9 May 2007 | Maker faire 2006.gif (file) |  |
6 KB | Rjf | Logo from the Inaugural Maker Faire in 2006. | 1 |
| 06:47, 4 May 2007 | DSC00309.JPG (file) |  |
825 KB | Rjf | PriusBlue at the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 06:47, 4 May 2007 | DSC00307.JPG (file) |  |
829 KB | Rjf | PriusBlue at the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 10:11, 2 May 2007 | DSC00315.JPG (file) |  |
696 KB | Rjf | PriusBlue at the nine canyon road wind farm with it's many 60 meter (200 foot) 1330 kW turbines after the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 10:02, 2 May 2007 | DSC00308.JPG (file) |  |
911 KB | Rjf | PriusBlue at the Franklin PUD's Alternative Energy Expo in Pasco, WA on April 27th 2007. | 1 |
| 04:31, 28 April 2007 | EAA-PHEV-PRIUS-ControlBd layout.png (file) |  |
45 KB | Cewert | V4.3_20070904 | 1 |
| 00:13, 27 April 2007 | Low voltage wiring inside OEM Battery modified.jpg (file) |  |
671 KB | Cewert | Modified wiring inside the OEM battery. This is for the charge interlock system and the ready wire tap. | 1 |
| 00:12, 27 April 2007 | Low voltage wiring inside OEM Battery.jpg (file) |  |
675 KB | Cewert | Unmodified low voltage wiring inside OEM battery. Shows green wires from contactors going to chassis ground. | 1 |
| 00:10, 27 April 2007 | Inside OEM battery after tie in.jpg (file) |  |
678 KB | Cewert | Inside the OEM battery after the HV tie in is completed. | 1 |
| 00:09, 27 April 2007 | Inside OEM battery from back of car.jpg (file) |  |
689 KB | Cewert | The inside of the OEM battery from the rear of the car (unmodified.) | 1 |
