General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Revision history of "File:Plexiglass Shield.JPG"

Jump to navigation Jump to search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 22:51, 17 December 2006‎ Cewert talk contribs‎ 264 bytes +264‎ I choose to install a plexiglass 'shield' on the side of the aluminum angle iron to reduce the risk of a wire / terminal hitting the aluminum and arcing. I am not sure if that is in the official CalCars plans or not. It is held in by non-conductive nylo
Retrieved from "https://www.eaa-phev.org/wiki/File:Plexiglass_Shield.JPG"