General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Revision history of "File:Holes drilled in aluminum.JPG"

Jump to navigation Jump to search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 05:12, 15 December 2006‎ Cewert talk contribs‎ 241 bytes +241‎ Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit.
Retrieved from "https://www.eaa-phev.org/wiki/File:Holes_drilled_in_aluminum.JPG"