Difference between revisions of "Template:EAA-PHEV-PRIUS-HVPartsList"

Revision as of 21:14, 20 July 2007

Parts List for CalCars' PRIUS+ HV Electrical
Ronald Gremban, 1/21/2007

Quantity	Value	DigiKey Number	Board Designators	Min Qty	Est Cost	Est Cost
	Misc. Components
1	Omron SPDT Relay	Z785-ND (or DPDT Z790-ND, $7.58)	RL1 in OEM batt box		$6.45	$6.45
1	Relay Socket	Z791-ND track socket	RL1 in OEM batt box		$4.95	$4.95
1	Relay holddown clip	Z795-ND (for Z791-ND socket)	RL1 in OEM batt box		$0.28	$0.28
1	Omron SPDT Relay	Z786-ND (optional)	HVRL4 (optional)		$7.58	$7.58
1	Heat sink	HS117-ND	HVD1		$7.63	$7.63
1	Diode mounting kit	Need shoulder, mica, & lock washer, 1/4-20 nut, heat sink compound, Also need 1/4" I.D. ring terminal for cathode	HVD1			$0.00
1	1N1186A	1N1186A-ND	HVD1		$6.56	$6.56
2	.47uF, 500V cap	495-1315	HVC1, HVC2		$0.67	$1.34
2	22, 1w resistor	22W-1-ND	HVR1, HVR2		$0.15	$0.30
2	10K Thermistor	KC003T-ND , * Correct quantity?	TBD (Thr1-2?)		$2.96	$5.92

	Mating Housings and Pins (for control board)
4	2 pin 0.1” Molex	WM2000-ND	J6F,J7F,J10F,J20F		$0.25	$1.00
3	3 pin 0.1” Molex	WM2001-ND	J2F		$0.32	$0.96
17	0.1” Crimp pins	WM1114-ND	All 0.1” Housings	20	$0.07	$1.48
9	2-pin 0.156" Molex	WM2111-ND	J11F–19F		$0.27	$2.43
1	3 pin 0.156” Molex	WM2112-ND	J3F		$0.36	$0.36
1	4-pin 0.156" Molex	WM2113-ND	J4F		$0.44	$0.44
1	5-pin 0.156" Molex	WM2114-ND	J8F		$0.52	$0.52
1	6-pin 0.156" Molex	WM2115-ND	J5F		$0.60	$0.60
36	0.156” Crimp Pins	WM2300-ND	All 0.156” Housings	40	$0.07	$2.80

86						$51.60

@@ Line 1: / Line 1: @@
-	<html>
+{{EditThis|Template:EAA-PHEV-PRIUS-HVPartsList|right|Edit this Parts List}}
+Parts list for [[:Image:EAA-PHEV-PRIUS-HighPowerSchematic.png|High Power Schematic]]
+* [http://sales.digikey.com/scripts/ru.dll?action=pb_view&pb_glue=1014150 DigiKey parts list]
+* [http://sales.digikey.com/scripts/ru.dll?action=pb_view&pb_glue=1014585 Mating connectors]
+<!-- Editing notes:
+This Template is created by opening the original .xls spreadsheet in
+OpenOffice and then saving it as a .html document.  Next remove the
+first line containing the "DOCTYPE", and remove the entire "STYLE"
+through "/STYLE" section.  Also if so inclined fix the long text
+cells by spanning them, to do this add to long "TD" entries "COLSPAN=2"
+and then remove the following empty "TD" line, preview, repeat if needed
+by adding 1 to the COLSPAN and remove another "TD" line until the text
+appears properly as a single line which spans the necessary cells.
+Be sure to "Show Preview" until it's correct, then you may "Save page".
+-->
+<html>
 <HEAD>
@@ Line 266: / Line 282: @@
 <!-- ************************************************************************** -->
 </BODY>
 </html>