General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
Difference between revisions of "Hybrids-Plus"
Jump to navigation
Jump to search
DavideAndrea (talk | contribs) |
({{Prius PHEV Options Summary}}) |
||
Line 3: | Line 3: | ||
Based in Boulder CO, the group is focusing on the Colorado Front Range market. | Based in Boulder CO, the group is focusing on the Colorado Front Range market. | ||
− | |||
[[Image:hybridspluslogo.gif]] | [[Image:hybridspluslogo.gif]] | ||
− | + | ---- | |
− | + | {{Prius PHEV Options Summary}} | |
==Vehicle specs== | ==Vehicle specs== |
Revision as of 03:19, 18 November 2006
Contents
Hybrids-Plus / EnergySense are presently developing a PHEV conversion system for the Toyota Prius.
Based in Boulder CO, the group is focusing on the Colorado Front Range market.
Click show for a short list of the current PHEV conversion and kit options for the Toyota Prius. |
---|
For Prius conversion details see the Prius PHEV article and comparisons table.
|
Vehicle specs
- Two models: Prius-15 and Prius-30
- Pure EV range (< 34 mph): 15 miles / 30 miles
- PHEV range (conservative driving, after full charge): 25 miles / 50 miles
- PHEV fuel efficiency (conservative, full charge): 100 mpg
- Adds 30 / 70 kg to vehicle mass
- Conversion locations:
- In place of OEM battery, and taking some of the space occupied by the black tray in trunk
- Maintains access to spare tire, in its original location
- Charge plug in rear bumper
Technology
- Original traction pack and Battery ECU removed
- New traction pack:
- LiIon - A123 - 26650 cells (same as DeWalt 36V battery packs)
- 4.5 / 9 kWh
- Electronics:
- Charger:
- 1.35 KW, 115 Vac @ 15 A
- Non-isolated from AC-line (traction pack is isolated from rest of vehicle during charging)
- Power Factor Controlled Step-up
- 80% DOD to charged in 5 / 9 hours
- Proprietary custom design
- BMS
- One module per set of parallel cells, with charge current pypass shunt
- A BMS controller, powered by vehicle aux 12 V, isolated from traction pack
- Proprietary custom design
- Controller
- Interfaces to BMS, charger, vehicle
- CAN interface to the vehicle
- Powered by vehicle aux 12 V
- Proprietary custom design
- Charger:
Team
- Carl Lawrence, chief & mechanics developnment - http://EnergySense.com, http://Otivia.com
- James Feeney, initial guidance
- Davide Andrea, electronics development - http://D-de.com, http://PartNumber.com
- Bill Dube', battery consultant - http://KillaCycle.com
- Theresa Szczurek, entrepreneur
- Nancy Balch
- Ann Colcord, PR manager
Timeline
- Spring 2006 - initial explorations
- June 7 2006 - Hybrids Plus incorporated
- June 26 2006 - official start of work
- July 3 2006 - got our first Prius to convert - cleared the contents down to the stock traction pack
- July 5 2006 - website up
- July 7 2006 - first contract: Colorado Office of Energy Management
- July 11 2006 - finished assembling the first set of electronics: charger, controller, cell BMS modules
- July 25 2006 - received 2000 cells from A123
- Sept 16 2006 - drove around town for the 1st time in our 1st converted Prius