General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
All public logs
Jump to navigation
Jump to search
Combined display of all available logs of My wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 100 | older 100) (20 | 50 | 100 | 250 | 500)- 13:36, 15 January 2007 DavideAndrea talk contribs uploaded File:Escape Interlock ckt.gif
- 13:28, 15 January 2007 DavideAndrea talk contribs uploaded File:Escape Interlock ckt.gif (Ford Escape: HV Interlock circuit)
- 06:45, 15 January 2007 Rjf talk contribs deleted page Talk:PriusPlus-Electrical/ (spam)
- 21:43, 12 January 2007 DavideAndrea talk contribs uploaded File:Escape soc plot.gif (Ford Escape: plot of SOC versus time, parked.)
- 19:44, 12 January 2007 Cewert talk contribs uploaded File:JTN60060 Fuse Holder.JPG (JTN60060 Fuse Holder)
- 19:41, 12 January 2007 Cewert talk contribs uploaded File:JTN60060 Fuse Holder.JPG (JTN60060 Fuse Holder)
- 19:39, 12 January 2007 Cewert talk contribs uploaded File:LPJ-60SP.JPG (The 60 amp LPJ-60SP fuse)
- 19:07, 12 January 2007 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-LEDBdPartsList.zip (Version: ''V4_070111''<BR> The Excel parts list for the LED Board was exported from ExpressSCH. See also: * Image:EAA-PHEV-PRIUS-LEDBdSchematic.zip ---- 250px)
- 19:07, 12 January 2007 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-LEDBdSchematic.zip (Version: ''V4_070111''<BR> The schematic for the LED Board was created in ExpressSCH. See also: * Image:EAA-PHEV-PRIUS-LEDBdPartsList.zip ---- 250px)
- 19:06, 12 January 2007 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-LEDBdSchematic.png (Version: ''V4_070111''<BR> These are the LED board schematics from the latest PriusPlus conversion. See also: * Image:EAA-PHEV-PRIUS-LEDBdSchematic.zip * Image:EAA-PHEV-PRIUS-LEDBdPartsList.zip)
- 19:06, 12 January 2007 Cewert talk contribs uploaded File:EV200 Contactor.JPG (The Kilovac EV200A4ANA (EV200) contactor)
- 19:05, 12 January 2007 Cewert talk contribs uploaded File:Bottom of JTN60060.JPG (Bottom of the fuse holder)
- 19:03, 12 January 2007 Cewert talk contribs uploaded File:Fuse in holder.JPG (Installing the fuse into the holder)
- 19:01, 12 January 2007 Cewert talk contribs uploaded File:Fuses and Holders.JPG (The fuses and holders)
- 18:44, 12 January 2007 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 18:18, 12 January 2007 DavideAndrea talk contribs uploaded File:Escape reported vs actual soc.gif (Ford Escape Hybrid. Graph of reported SOC vs actual SOC)
- 06:53, 12 January 2007 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-ControlBdPartsList.zip (Version: ''V4_070110''<br> The Excel parts list for the Control Board was exported from ExpressSCH. See also: * EAA-PHEV-PRIUS-ControlBdSchematic.zip ---- 250px)
- 06:52, 12 January 2007 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-ControlBdSchematic.zip (Version: ''V4_070110''<br> The schematic for the Control Board was created in ExpressSCH. See also: * EAA-PHEV-PRIUS-ControlBdPartsList.zip ---- 250px)
- 06:38, 12 January 2007 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-ControlBdSchematic.png (New v4)
- 19:37, 10 January 2007 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 20:52, 9 January 2007 Rjf talk contribs deleted page Index.php (spam)
- 12:38, 9 January 2007 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 07:25, 8 January 2007 Rjf talk contribs deleted page Index.php (spam)
- 20:00, 7 January 2007 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 22:44, 6 January 2007 Rjf talk contribs deleted page Talk:Toyota Prius (spam)
- 22:40, 5 January 2007 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 00:05, 2 January 2007 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 21:23, 31 December 2006 DavideAndrea talk contribs uploaded File:Batterypack hvac.jpg (Ford Escape HVAC components)
- 20:47, 31 December 2006 DavideAndrea talk contribs uploaded File:Batterypack airflow.jpg (Air flow in the Escape's HVAC system)
- 17:43, 30 December 2006 DavideAndrea talk contribs blocked 203.81.193.166 talk with an expiration time of 1 week (spam, porno)
- 02:31, 26 December 2006 DavideAndrea talk contribs deleted page Talk:Main Page/ (Irrelevant to the wiki and, in any case, won't be applicable tomorrow)
- 23:58, 22 December 2006 DavideAndrea talk contribs uploaded File:AllCanMessages.gif (All the Escape CAN bus messages)
- 00:55, 22 December 2006 DavideAndrea talk contribs uploaded File:Batterypack converter.jpg (Jump Start Converter from the battery pack)
- 00:55, 22 December 2006 DavideAndrea talk contribs uploaded File:Batterypack controller open.jpg (Controller from the battery pack, open)
- 00:54, 22 December 2006 DavideAndrea talk contribs uploaded File:Batterypack controller.jpg (Controller from the battery pack)
- 00:45, 22 December 2006 DavideAndrea talk contribs uploaded File:Batterypack locations.jpg (Location of components inside battery)
- 00:07, 22 December 2006 DavideAndrea talk contribs uploaded File:HV connector battery.gif (HV connector pin-out, battery end)
- 00:06, 22 December 2006 DavideAndrea talk contribs uploaded File:HV connector cable.gif (HV connector pin-out, cable end)
- 00:06, 22 December 2006 DavideAndrea talk contribs uploaded File:Control connector battery.gif (Control connector pin-out, battery end)
- 00:05, 22 December 2006 DavideAndrea talk contribs uploaded File:Control connector cable.gif (Control connector pin-out, cable end)
- 00:04, 22 December 2006 DavideAndrea talk contribs uploaded File:Acdc connector battery.gif (AC/DC connector pin-out, battery end)
- 00:03, 22 December 2006 DavideAndrea talk contribs uploaded File:Acdc connector cable.gif (AC/DC connector pin-out, cable end)
- 20:38, 21 December 2006 DavideAndrea talk contribs uploaded File:Battery block diag.gif (Block diagram of the Traction Battery in a Ford Escape Hybrid)
- 18:35, 21 December 2006 DavideAndrea talk contribs uploaded File:Battery wiring diag.gif (Wiring diagram of teh Traction Battery in a Ford Escape Hybrid)
- 18:33, 21 December 2006 DavideAndrea talk contribs deleted page File:Battery wiring diag.pdf (can't use PDF as attachments to MediaWiki, it seems)
- 18:21, 21 December 2006 DavideAndrea talk contribs uploaded File:Battery wiring diag.pdf (Wiring diagram of Ford Escape Hybrid's Traction Battery)
- 06:58, 20 December 2006 Rjf talk contribs uploaded File:MyMileage.zip (New tanks, last for 2006.)
- 04:12, 20 December 2006 Rjf talk contribs deleted page Talk:Plug-In Hybrids/index.php (spam)
- 23:02, 17 December 2006 Cewert talk contribs uploaded File:Mostly Finished Batt Box.JPG (Mostly finished battery box. Holes still need to be drilled into the angle irons to bolt down, and bolts will be added in the middle between the trays to bolt the top of the pack to the bottom. Also, mounting frame is not completely cut to size.)
- 23:00, 17 December 2006 Cewert talk contribs uploaded File:Batt Box with Bolt Down Angle.JPG (Shows the aluminum angle iron that sicks out of each side to bolt the battery box top down to the car. Waiting to drill holes until it is actually mounted.)
- 22:57, 17 December 2006 Cewert talk contribs uploaded File:Finished Corner.JPG (Finished corner with ground of screws. I'm pretty sure this isn't done the official CalCars method.)
- 22:56, 17 December 2006 Cewert talk contribs uploaded File:Binding Posts Ground Down.JPG (These are the binding posts I choose to use. The one on the left is ground down to fit and the burs are also ground off. I'm sure there is a better way to do this, but it worked.)
- 22:54, 17 December 2006 Cewert talk contribs uploaded File:Inside Corner.JPG (Inside the corner bracket. The machine screws are counter sunk into the aluminum angle iron.)
- 22:53, 17 December 2006 Cewert talk contribs uploaded File:Batt Box with Bolt Down Angle.JPG (Corner bracket in place and screwed down on the top. Ready to drill holes in the side and bolt down the bracket from the sides.)
- 22:51, 17 December 2006 Cewert talk contribs uploaded File:Plexiglass Shield.JPG (I choose to install a plexiglass 'shield' on the side of the aluminum angle iron to reduce the risk of a wire / terminal hitting the aluminum and arcing. I am not sure if that is in the official CalCars plans or not. It is held in by non-conductive nylo)
- 22:43, 17 December 2006 Cewert talk contribs uploaded File:Batt Box Top 3 Angles.JPG (Aluminum angle irons cut with 45 degree angles and laid on top of the battery box)
- 22:40, 17 December 2006 Rjf talk contribs unblocked 201.18.150.92 talk (Only block an IP for about a week, others may use the same IP address.)
- 22:40, 17 December 2006 Rjf talk contribs unblocked 61.40.161.148 talk (Only block an IP for about a week, others may use the same IP address.)
- 22:39, 17 December 2006 Rjf talk contribs unblocked 220.31.100.174 talk (Only block an IP for about a week, others may use the same IP address.)
- 22:29, 17 December 2006 Rjf talk contribs deleted page Index.php (spam)
- 16:24, 16 December 2006 DavideAndrea talk contribs blocked 201.18.150.92 talk with an expiration time of indefinite (spam)
- 01:30, 16 December 2006 DavideAndrea talk contribs uploaded File:Batterypack-power-conn.jpg (Ford Escape, battery pack, power connectors)
- 01:28, 16 December 2006 DavideAndrea talk contribs uploaded File:Batterypack-data-conn.jpg (Ford Escape, data connectors)
- 01:27, 16 December 2006 DavideAndrea talk contribs uploaded File:Batterypack-open2.jpg (Ford Escape, battery open, view from the front)
- 01:25, 16 December 2006 DavideAndrea talk contribs uploaded File:Batterypack-open1.jpg (Ford Escape, battery open, front view)
- 01:24, 16 December 2006 DavideAndrea talk contribs uploaded File:Trunk-sans-battery.jpg (Ford Escape, trunk without the battery)
- 01:23, 16 December 2006 DavideAndrea talk contribs uploaded File:Batterypack-out.jpg (Ford Escape, battery lifted out of thetrunk)
- 05:34, 15 December 2006 Cewert talk contribs uploaded File:Top Battery Box With Corner Bracket.JPG (Corner bracket is just sitting on the top of the battery box waiting to be screwed down.)
- 05:33, 15 December 2006 Cewert talk contribs uploaded File:Top Battery Box 45 Degree Cuts.JPG (The aluminum angle irons are cut with 45 degree angles so they fit snugly)
- 05:31, 15 December 2006 Cewert talk contribs uploaded File:Starting on the Top of Battery Box.JPG (Bottom is mostly assembled, now starting on cutting the angle irons for the top.)
- 05:29, 15 December 2006 Cewert talk contribs uploaded File:2 Trays with Some Supports.JPG (2 of the trays sitting on 2 1-1/2 angle irons (others just sitting there))
- 05:19, 15 December 2006 Cewert talk contribs uploaded File:4 Finished Trays.JPG
- 05:18, 15 December 2006 Cewert talk contribs uploaded File:Finished Tray.JPG
- 05:17, 15 December 2006 Cewert talk contribs uploaded File:Screws Sticking Through Partially Assembled Tray.JPG (I used extra long, self threading screws, so they stick through. I used a hacksaw first, and then a dremel with a metal cut off attachment to cut the screws at the base. Then used a grinder to grind them perfectly flat.)
- 05:14, 15 December 2006 Cewert talk contribs uploaded File:Closeup of Sample Finished Corner.JPG (This is just a sample I tried on a scrap pieces before doing the real thing.)
- 05:12, 15 December 2006 Cewert talk contribs uploaded File:Holes drilled in aluminum.JPG (Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit.)
- 05:10, 15 December 2006 Cewert talk contribs uploaded File:Tray Parts Laid Out.JPG (All the parts of one tray laid out)
- 05:08, 15 December 2006 Cewert talk contribs uploaded File:Dremel Drill Press.JPG (This is the Dremel drill press I used to drill the small holes in the angle irons.)
- 05:06, 15 December 2006 Cewert talk contribs uploaded File:Almost Finished Tray Jig.JPG
- 05:04, 15 December 2006 Cewert talk contribs uploaded File:Making Tray Jig Step 3.JPG (Place wood to hold the channel irons in place)
- 05:02, 15 December 2006 Cewert talk contribs uploaded File:Making Tray Jig Step 1.JPG (Step one is to place wood around the outsides of the angle iron to hold the angle irons in place.)
- 05:01, 15 December 2006 Cewert talk contribs uploaded File:Making Tray Jig Step 2.JPG (The set together tray with batteries and wood secured in placed around the outsides to form the jig.)
- 04:58, 15 December 2006 Cewert talk contribs uploaded File:Tray Ready for Jig.JPG (This photo is of the tray set together on a sheet of plywood (wich will be used as a jig to hold everything in place for drilling holes.)
- 04:56, 15 December 2006 Cewert talk contribs uploaded File:Tray Set Together Close Up.JPG
- 04:55, 15 December 2006 Cewert talk contribs uploaded File:Tray Set Together With Battery.JPG
- 04:54, 15 December 2006 Cewert talk contribs uploaded File:Tray Pieces.JPG (These are all the aluminum pieces needed to build the 4 battery trays.)
- 04:51, 15 December 2006 Cewert talk contribs uploaded File:Cutting Aluminum.JPG
- 08:56, 13 December 2006 Rjf talk contribs deleted page File:EAA-PHEV-PRIUS-ControlBdSchematicV3r1 061116.png (outdated)
- 08:56, 13 December 2006 Rjf talk contribs deleted page File:EAA-PHEV-PRIUS-HighPowerSchematicV3r1 061116.png (outdated)
- 08:56, 13 December 2006 Rjf talk contribs deleted page File:EAA-PHEV-PRIUS-HighPowerSchematicV3r1 061116.png (Deleted old revision 20061118003355!EAA-PHEV-PRIUS-HighPowerSchematicV3r1_061116.png.)
- 08:56, 13 December 2006 Rjf talk contribs deleted page File:EAA-PHEV-PRIUS-HighPowerSchematicV3r1 061116.png (Deleted old revision 20061117222211!EAA-PHEV-PRIUS-HighPowerSchematicV3r1_061116.png.)
- 08:53, 13 December 2006 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-HighPowerSchematic.png (These are the high power schematics from the latest PriusPlus conversion. V3r2_061210)
- 08:53, 13 December 2006 Rjf talk contribs uploaded File:EAA-PHEV-PRIUS-ControlBdSchematic.png (These are the low power control board schematics from the latest PriusPlus conversion. V3r3_061211)
- 08:42, 13 December 2006 Rjf talk contribs deleted page Talk:Main Page/ (spam)
- 21:16, 12 December 2006 Rjf talk contribs deleted page Index.php (spam)
- 18:55, 11 December 2006 Rjf talk contribs deleted page Index.php (spam)
- 18:55, 11 December 2006 Rjf talk contribs deleted page Talk:Main Page/ (spam)
- 03:59, 8 December 2006 Rjf talk contribs deleted page Talk:PriusPlus/ (ok, that's just weird.)
- 17:22, 6 December 2006 Rjf talk contribs uploaded File:Day 4 Image 9.JPG (brightness adjusted.)
- 17:22, 6 December 2006 Rjf talk contribs uploaded File:Day 4 Image 8.JPG (brightness adjusted.)