|
General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
Difference between revisions of "Talk:PriusPlus-Electronic"
Jump to navigation
Jump to search
(todo) |
(No difference)
|
Revision as of 20:17, 12 March 2007
TODO
- CAN-View instructions need corrections, clarification
- CAN-View instructions for the V4 need to be added.
- Routing of major cables
- EV-Mode from dash to electronics tray
- DB15 from CAN-View to electronics tray (by the way, its about 11 feet from drivers side to board in electronics tray, 10ft not enough!)
- Instructions for setting pots on control board
- CAN-View relay setup
- Placement of thermistors
- Upload silkscreen PCB layout and label inputs / outputs.
Discussion
Will a link to instructions on hybridinterfaces.ca suffice for the CAN-View v4 installation instructions? Perhaps we could direct people to the installation instructions and focus the documentation on instructions on how to do the EV-mode switch at the same time... - Cewert
