General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Talk:PriusPlus-Electronic

From My wiki
Revision as of 20:17, 12 March 2007 by Cewert (talk | contribs) (todo)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TODO

  • CAN-View instructions need corrections, clarification
  • CAN-View instructions for the V4 need to be added.
  • Routing of major cables
    • EV-Mode from dash to electronics tray
    • DB15 from CAN-View to electronics tray (by the way, its about 11 feet from drivers side to board in electronics tray, 10ft not enough!)
  • Instructions for setting pots on control board
  • CAN-View relay setup
  • Placement of thermistors
  • Upload silkscreen PCB layout and label inputs / outputs.


Discussion

Will a link to instructions on hybridinterfaces.ca suffice for the CAN-View v4 installation instructions? Perhaps we could direct people to the installation instructions and focus the documentation on instructions on how to do the EV-mode switch at the same time... - Cewert

Retrieved from "https://www.eaa-phev.org/wiki/index.php?title=Talk:PriusPlus-Electronic&oldid=4273"