General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
User contributions
Jump to navigation
Jump to search
- 01:51, 4 March 2007 diff hist +868 PriusPlus-Electronic →CAN-View & EV Mode button
- 20:50, 27 February 2007 diff hist 0 m PriusPlus-Mechanical →Battery Box Supports
- 20:48, 27 February 2007 diff hist -82 PriusPlus-Electrical →Electrical Parts List and Descriptions: moved to list below
- 20:07, 27 February 2007 diff hist +65 PriusPlus-Electrical →Parts Needed: Seperated Anderson housings from crimps, added fan
- 19:59, 27 February 2007 diff hist -66 PriusPlus-Electrical →Electrical Parts List and Descriptions: Removed components no longer necessary
- 19:40, 27 February 2007 diff hist -278 PriusPlus-Electrical →Parts Needed: Removed DigiKey parts, adding into new list
- 05:41, 26 February 2007 diff hist +332 PriusPlus-Electronic →Control Board: Started organizing info, added parts lists
- 22:37, 25 February 2007 diff hist -246 PriusPlus-Electronic →TODO: removed stuff already done
- 22:24, 25 February 2007 diff hist +108 PriusPlus-Electronic →Parts List: Added link to DigiKey parts list
- 16:52, 23 February 2007 diff hist +110 PriusPlus-Theory →Control Circuit Board: clean-up
- 18:10, 19 February 2007 diff hist +48 Template:EAA-PHEV-PRIUS-ControlBdPartsList Digikey min order for 1/4 watt resistors is qty 10
- 18:07, 19 February 2007 diff hist 0 Template:EAA-PHEV-PRIUS-ControlBdPartsList Corrected 2.2k resistor digikey part number
- 04:39, 14 February 2007 diff hist +1,723 PriusPlus-RawData Optional batt box mounting method
- 03:25, 14 February 2007 diff hist +397 PriusPlus-RawData Added more photos from my conversion (starting alt. batt box mounting method.)
- 23:01, 13 February 2007 diff hist +176 N Talk:PriusBlue Mileage
- 04:15, 13 February 2007 diff hist +99 N File:Batt box test fit forward design.JPG Test fitting (and partially mounted) battery box. The battery box is moved as forward as possible. current
- 04:13, 13 February 2007 diff hist +65 N File:Bracket on OEM Batt screw.JPG Bracket on OEM battery mounts I used to hold down new battery box current
- 04:09, 13 February 2007 diff hist +58 N File:Batt Box with screw lift supports.JPG Battery box set together with supports for screw lift idea current
- 04:07, 13 February 2007 diff hist +34 N File:P1240040.JPG Battery box from side set together current
- 19:07, 15 January 2007 diff hist +234 PriusPlus-Electrical →Parts Needed: Updated list
- 19:45, 12 January 2007 diff hist +145 PriusPlus-Electrical →Electrical Parts List and Descriptions: Added photos of parts
- 19:41, 12 January 2007 diff hist +20 N File:JTN60060 Fuse Holder.JPG JTN60060 Fuse Holder current
- 19:39, 12 January 2007 diff hist +24 N File:LPJ-60SP.JPG The 60 amp LPJ-60SP fuse current
- 19:20, 12 January 2007 diff hist +226 PriusPlus-RawData →Photos from Chris Ewert's Conversion: Added component photos
- 19:06, 12 January 2007 diff hist +40 N File:EV200 Contactor.JPG The Kilovac EV200A4ANA (EV200) contactor current
- 19:05, 12 January 2007 diff hist +25 N File:Bottom of JTN60060.JPG Bottom of the fuse holder current
- 19:03, 12 January 2007 diff hist +35 N File:Fuse in holder.JPG Installing the fuse into the holder current
- 19:01, 12 January 2007 diff hist +21 N File:Fuses and Holders.JPG The fuses and holders current
- 04:21, 11 January 2007 diff hist +754 Template talk:Prius PHEV Options Re: Spill proof Lead-Acid?
- 02:18, 8 January 2007 diff hist -74,627 Talk:Main Page spam
- 20:17, 5 January 2007 diff hist +122 PriusPlus-Electrical →Electrical Parts List and Descriptions: Added parts
- 04:38, 3 January 2007 diff hist +1,254 PriusPlus-Electrical →Electrical Parts List and Descriptions
- 22:03, 1 January 2007 diff hist -609 PriusPlus-Theory →Control Circuit Board: Simplification & corrections
- 21:36, 1 January 2007 diff hist +306 PriusPlus-Theory →The CAN-View
- 20:14, 1 January 2007 diff hist +3,784 PriusPlus-Theory →The PHEV Battery Pack
- 04:32, 24 December 2006 diff hist -98 PriusPlus-Electrical Oops, put stuff in the wrong sections
- 04:30, 24 December 2006 diff hist +1 m PriusPlus-Electrical Minor mistake
- 04:30, 24 December 2006 diff hist +2,385 PriusPlus-Electrical Added more categories and tips for safe battery handling
- 03:35, 24 December 2006 diff hist +796 PriusPlus-Mechanical Started battery box base documentation
- 03:21, 24 December 2006 diff hist +1 m PriusPlus-Mechanical Minor mistake
- 03:20, 24 December 2006 diff hist +1 m PriusPlus-Mechanical →Parts Needed
- 03:20, 24 December 2006 diff hist +4,868 PriusPlus-Mechanical Added battery box top instructions and photos
- 02:41, 24 December 2006 diff hist +695 PriusPlus-Mechanical cleaned up and added measurements to battery tray instructions
- 18:02, 22 December 2006 diff hist +1,006 PriusPlus-Mechanical Started Battery Box Top Documentation
- 17:46, 22 December 2006 diff hist +414 PriusPlus-Mechanical →Battery Trays
- 20:37, 18 December 2006 diff hist +836 PriusPlus-RawData Added more photos to Chris Ewert's conversion
- 23:02, 17 December 2006 diff hist +247 N File:Mostly Finished Batt Box.JPG Mostly finished battery box. Holes still need to be drilled into the angle irons to bolt down, and bolts will be added in the middle between the trays to bolt the top of the pack to the bottom. Also, mounting frame is not completely cut to size. current
- 22:57, 17 December 2006 diff hist +100 N File:Finished Corner.JPG Finished corner with ground of screws. I'm pretty sure this isn't done the official CalCars method. current
- 22:56, 17 December 2006 diff hist +180 N File:Binding Posts Ground Down.JPG These are the binding posts I choose to use. The one on the left is ground down to fit and the burs are also ground off. I'm sure there is a better way to do this, but it worked. current
- 22:54, 17 December 2006 diff hist +93 N File:Inside Corner.JPG Inside the corner bracket. The machine screws are counter sunk into the aluminum angle iron. current
- 22:53, 17 December 2006 diff hist +128 N File:Batt Box with Bolt Down Angle.JPG Corner bracket in place and screwed down on the top. Ready to drill holes in the side and bolt down the bracket from the sides. current
- 22:51, 17 December 2006 diff hist +264 N File:Plexiglass Shield.JPG I choose to install a plexiglass 'shield' on the side of the aluminum angle iron to reduce the risk of a wire / terminal hitting the aluminum and arcing. I am not sure if that is in the official CalCars plans or not. It is held in by non-conductive nylo current
- 22:43, 17 December 2006 diff hist +81 N File:Batt Box Top 3 Angles.JPG Aluminum angle irons cut with 45 degree angles and laid on top of the battery box current
- 15:40, 15 December 2006 diff hist +1,539 PriusPlus-RawData Added Chris's Battery Box Photos
- 05:34, 15 December 2006 diff hist +88 N File:Top Battery Box With Corner Bracket.JPG Corner bracket is just sitting on the top of the battery box waiting to be screwed down. current
- 05:33, 15 December 2006 diff hist +73 N File:Top Battery Box 45 Degree Cuts.JPG The aluminum angle irons are cut with 45 degree angles so they fit snugly current
- 05:31, 15 December 2006 diff hist +80 N File:Starting on the Top of Battery Box.JPG Bottom is mostly assembled, now starting on cutting the angle irons for the top. current
- 05:29, 15 December 2006 diff hist +73 N File:2 Trays with Some Supports.JPG 2 of the trays sitting on 2 1-1/2 angle irons (others just sitting there) current
- 05:19, 15 December 2006 diff hist 0 N File:4 Finished Trays.JPG current
- 05:18, 15 December 2006 diff hist 0 N File:Finished Tray.JPG current
- 05:17, 15 December 2006 diff hist +221 N File:Screws Sticking Through Partially Assembled Tray.JPG I used extra long, self threading screws, so they stick through. I used a hacksaw first, and then a dremel with a metal cut off attachment to cut the screws at the base. Then used a grinder to grind them perfectly flat. current
- 05:14, 15 December 2006 diff hist +76 N File:Closeup of Sample Finished Corner.JPG This is just a sample I tried on a scrap pieces before doing the real thing. current
- 05:12, 15 December 2006 diff hist +241 N File:Holes drilled in aluminum.JPG Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit. current
- 05:10, 15 December 2006 diff hist +34 N File:Tray Parts Laid Out.JPG All the parts of one tray laid out current
- 05:08, 15 December 2006 diff hist +82 N File:Dremel Drill Press.JPG This is the Dremel drill press I used to drill the small holes in the angle irons. current
- 05:06, 15 December 2006 diff hist 0 N File:Almost Finished Tray Jig.JPG current
- 05:04, 15 December 2006 diff hist +45 N File:Making Tray Jig Step 3.JPG Place wood to hold the channel irons in place current
- 05:02, 15 December 2006 diff hist +97 N File:Making Tray Jig Step 1.JPG Step one is to place wood around the outsides of the angle iron to hold the angle irons in place. current
- 05:01, 15 December 2006 diff hist +100 N File:Making Tray Jig Step 2.JPG The set together tray with batteries and wood secured in placed around the outsides to form the jig. current
- 04:58, 15 December 2006 diff hist +136 N File:Tray Ready for Jig.JPG This photo is of the tray set together on a sheet of plywood (wich will be used as a jig to hold everything in place for drilling holes. current
- 04:56, 15 December 2006 diff hist 0 N File:Tray Set Together Close Up.JPG current
- 04:55, 15 December 2006 diff hist 0 N File:Tray Set Together With Battery.JPG current
- 04:54, 15 December 2006 diff hist +70 N File:Tray Pieces.JPG These are all the aluminum pieces needed to build the 4 battery trays. current
- 04:51, 15 December 2006 diff hist 0 N File:Cutting Aluminum.JPG current