Difference between revisions of "File:Making Tray Jig Step 1.JPG"

Latest revision as of 05:02, 15 December 2006

Step one is to place wood around the outsides of the angle iron to hold the angle irons in place.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	05:02, 15 December 2006		2,048 × 1,536 (665 KB)	Cewert (talk \| contribs)	Step one is to place wood around the outsides of the angle iron to hold the angle irons in place.

You cannot overwrite this file.

The following 4 pages use this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Image title	OLYMPUS DIGITAL CAMERA
Camera manufacturer	OLYMPUS CORPORATION
Camera model	C740UZ
Exposure time	1/30 sec (0.033333333333333)
F Number	f/2.8
ISO speed rating	117
Date and time of data generation	Unknown date
Lens focal length	6.3 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	v754u2-86
File change date and time	Unknown date
Y and C positioning	Co-sited
Exposure Program	Creative program (biased toward depth of field)
Exif version	2.2
Date and time of digitizing	Unknown date
Image compression mode	2
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, auto mode
Color space	sRGB
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal