General Disclaimer:   (HV) (DC) injury or death hazard,   use at your own risk,   may void warranty.

Difference between revisions of "Talk:PriusPlus-Mechanical"

From My wiki
Jump to navigation Jump to search
(starting some todo's)
 
(rewrote todo)
Line 1: Line 1:
−
This is moved here for the time being to help with organizing:
+
This is here for the time being to help with organizing:
  
−
**Battery box base (Tom)
+
Todo (high priority):
−
**Plastic parts mounting board (Little Jim)
+
# Write up battery box base mounting
−
**Anti arc mounted to contactor - You will need a (identifying terminology here) capacitor part number (#) and solder one side to a “ ” ohm resistor and a matching length of wire to the other side of the capacitor. Once this has been completed cover the exposed wires with shrink wrap.  Finally, crimp ring connectors to each end and solder in place for a better connection.  (Add photo)
+
# Write up battery box base mounting for alt. mounting method
−
**Heating pad power boxes (Ron, can this now be shrunk down to a single three outlet box?)
+
# Write up mounting the GFCI outlet box (wiring to be on electrical)
−
**Charger mounting
+
# Write up mounting the charger
−
**Battery box mounting (Tom)
+
# Write up mounting the charger alt. mounting method
−
**Power cord mounting (Little Jim or Tom)
+
# Write up mounting the cord reel
−
**Amp meter mounting (Ron is the amp meter still needed?  Should we put this as optional?)
+
# Write up installing the bumper inlet (options for front or rear + routing cables)
−
**Diagnostic LEDs mounting - Use Velcro to mount it just inside the glass door under the radio. To run the ribbon cable, open up the dash and run a cable as shown it this diagram.  (Make and add diagram.)
+
# Write up assembly of electronics tray plastic
−
**V4 Screen mounting  
+
# Write up assembly of electronics box plastic for alt. mounting method
−
**[[CAN-View]] mounting
+
# Write up how to dissassemble the trunk (flooring on OEM battery, both side panels, opening the OEM battery (include HV warning), removal of kick panels for routing cables from front to rear of car.) Also needs re-assembly instructions.
−
**Prius disassembly and reassembly
+
 
 +
Todo (low priority):
 +
# Write up Amp meter mounting (to be listed as optional)
 +
# Write up diagnostic LEDs board mounting - Use Velcro to mount it just inside the glass door under the radio. To run the ribbon cable, open up the dash and run a cable as shown it this diagram.  (Make and add diagram.)
 +
# V4 Screen mounting (low priority because it can be found elsewhere)

Revision as of 02:22, 22 May 2007

This is here for the time being to help with organizing:

Todo (high priority):

  1. Write up battery box base mounting
  2. Write up battery box base mounting for alt. mounting method
  3. Write up mounting the GFCI outlet box (wiring to be on electrical)
  4. Write up mounting the charger
  5. Write up mounting the charger alt. mounting method
  6. Write up mounting the cord reel
  7. Write up installing the bumper inlet (options for front or rear + routing cables)
  8. Write up assembly of electronics tray plastic
  9. Write up assembly of electronics box plastic for alt. mounting method
  10. Write up how to dissassemble the trunk (flooring on OEM battery, both side panels, opening the OEM battery (include HV warning), removal of kick panels for routing cables from front to rear of car.) Also needs re-assembly instructions.

Todo (low priority):

  1. Write up Amp meter mounting (to be listed as optional)
  2. Write up diagnostic LEDs board mounting - Use Velcro to mount it just inside the glass door under the radio. To run the ribbon cable, open up the dash and run a cable as shown it this diagram. (Make and add diagram.)
  3. V4 Screen mounting (low priority because it can be found elsewhere)
Retrieved from "https://www.eaa-phev.org/wiki/index.php?title=Talk:PriusPlus-Mechanical&oldid=4499"