Talk:PriusPlus-Mechanical

This is moved here for the time being to help with organizing:

• • Battery box base (Tom)
  • Plastic parts mounting board (Little Jim)
  • Anti arc mounted to contactor - You will need a (identifying terminology here) capacitor part number (#) and solder one side to a “ ” ohm resistor and a matching length of wire to the other side of the capacitor. Once this has been completed cover the exposed wires with shrink wrap. Finally, crimp ring connectors to each end and solder in place for a better connection. (Add photo)
  • Heating pad power boxes (Ron, can this now be shrunk down to a single three outlet box?)
  • Charger mounting
  • Battery box mounting (Tom)
  • Power cord mounting (Little Jim or Tom)
  • Amp meter mounting (Ron is the amp meter still needed? Should we put this as optional?)
  • Diagnostic LEDs mounting - Use Velcro to mount it just inside the glass door under the radio. To run the ribbon cable, open up the dash and run a cable as shown it this diagram. (Make and add diagram.)
  • V4 Screen mounting
  • CAN-View mounting
  • Prius disassembly and reassembly