Talk:Conversion Interest

DIY any auto to hybrid

I can tell you how to make any car or truck into a hybrid and Ill probably do this to mine when I get time. Well first you find that switch on the trans[automatic ] that wont let you start in drive hot wire it probably just cut and twist the wires together. Next get a floor starter button and put it in the floor board like they had in the old days. After that all you do is screw your idle way down on the carb so she just stalls when you take your foot of the gas. thats it!! automatics are a lot smoother but with a stick you go farther full electric.dont cost much shure to payback quick.

I got another idea too just dump LP gas in to the intake air on any of the new fuel injected engines not too much just enough to make the ox sensor back down the gasoline consumption no need to get fancy about LP volumes let the computer squeeze down on the gas supply tryin to figure it out I think it would work but I wont try till I figure how to deal with a backfire through the air mass sensor ?

cheaper is always better -- 66.103.229.158 19:26, 29 August 2006

That's all fairly amusing, a little sarcasm is surely healthy. Unfortunently I'm pretty sure that both of your ideas would destroy part if not all of your non-hybrid powertrain. So don't try these at home kids ;) --Rjf 14:21, 30 August 2006 (CDT)