Search results

Further development of the [[PriusPlus History]] or [[Prius PHEV#Original CalCars Method]] has bee ...chematics contains various runlevel interlocks and manages the other parts of the conversion.

...'' NLG5 charger from MetricMind.com. This is a $4000, 4kW charger capable of being reprogramed for any chemistry and any voltage output up to 520V. It ...urations#Hybrid|hybrid pack]], or even use a hybrids ICE as a generator to charge other DC loads.

...strip, with additional length of ribbon cable spliced in. See [[State Of Charge Manipulation]] & [[Battery Tap Emulator]]. ...61.JPG|[[Prius PHEV Battery Options|One of Four sub-pack modules]] made up of 5 12v 20Ah SLA PbA B&B Batteries.

...w can triger ''V3'' which is a higher NiMH voltage that induces [[State Of Charge Drift]], raising the precieved SOC. ...designed to be as versatile and as powerful as possible within the limits of residential power infrastructure. Three models are available: The PFC20 tha

...ns for [[Prius PHEV]] conversions. Such a device would need to be capable of executing logic similar to this [[Prius PHEV Pseudo Code]]. Though an actu : '''Open Source''' courtesy of Attila Vass!

Rich Rudman of [[Manzanita Micro]], [[User:Rjf|Ryan]], and [[PriusBlue]], are working on a # 2006 Nov - [[GrayPearl]] for Todd Dore's of the Fox Vally EAA.

Further development of the [[PriusPlus History]] or [[Prius PHEV#Original CalCars Method]] has bee ...out of the OEM battery through the HAL sensor for a sort of "Genset Mode" of operation.

...e car into a [[Prius PHEV]] more cooling is desirable. There are a number of reasons such as: ...Configuration]] tends to warm the OEM battery during heavy use due to the charge current which is applied.

...ta Prius|Prius]] [[PHEV]] conversions beginning with [[User:Rgremban|Ron]] of [[:Category:CalCars|CalCars]] [http://www.CalCars.org] [http://groups.yahoo The tenth conversion of [[PriusBlue]] was undertaken in public April of 2006 at the [[Inaugural Maker Faire]] to help enhance the documentation and

...o function properly. Those tasks are covered in the following subsections of the Conversion Procedures. These instructions are currently under developm ...6 Prius CAN View V4 Mounting options] at PriusChat.com covers various ways of mounting the second touch screen.

...shed, but its just a quick overview for someone looking to do a conversion of how the system functions. ...ock battery). When the voltage hits a certain point, it causes a state of charge drift, which, once started, very rapidly increases the reported SOC.

Make is a celebration of all things do-it-yourself, and we're absolutely ecstatic to participate in As is the case with the first [[PriusPlus History]] and due to the DIY nature of the project we intend to always provide a drive-home mode for extreme debug

Our focus is currently on enhancing the documentation of [[Prius PHEV]] conversions such as CalCars [[PriusPlus]], the Manzanita Mic ...ent [[Hybrid]]s are natural donor platforms because they already have most of the needed electric propulsion components, so the conversion process deals

...used and whether or not the OEM battery is removed. This will use up some of the Prius’ available rear axle useful load. In practice, my PRIUS+’s ha ...rg/ (EAA)] members (thanks to everyone). You can view much of the history of the project at http://autos.groups.yahoo.com/group/priusplus/messages, espe

* No of Modules: 28 * Total no of Cells: 168

...mentation is laid out in three parts. The [[PriusPlus]] gives an overview of the conversion and lists benefits, limitations and normal operating behavio .... Currently, there are 2 methods, each with their benefits. The majority of the instructions are the same for both methods, however, some sections will